Euler–Euler simulation of flow-induced vibrations of an obstacle in two-phase pipe flow

Understanding Flow-Induced Vibrations (FIV) is essential for ensuring the safety of steam generators in nuclear power plants. Unchecked vibrations can cause tube wear, fatigue or even failure, posing potential safety risks. In U-tube configurations where two-phase cross-flow is prevalent, these issues become more severe. While this phenomenon has been thoroughly examined in single-phase cross-flow, its behavior in two-phase flows is less understood. The Horizon Europe project GO-VIKING aims to tackle these issues by utilizing experimental setups to investigate two-phase flow-induced vibrations. These facilities emphasize the Fluid-Structure Interaction (FSI) between tube bundles and air–water cross-flows. This paper presents both classical and hybrid Euler–Euler simulations of FIV of a cylindrical obstacle in two-phase pipe flow, as recently experimentally studied in the PILULE experiment performed by Electricité de France R&D. The emphasis of this work lies on the assessment of the two-phase modeling methodology itself, with the flow-induced vibration of the obstacle serving as an application and validation case. The LogMoM model is used for the poly-disperse bubble distribution, including advanced closure models for coalescence and break-up. Particularly in the wake of the obstacle, coalescence and break-up play an important role in the redistribution of void. In turn, drag and lift forces acting on the obstacle are predicted. The presented work contributes to establishing a validated two-phase flow FSI simulation strategy of FIV in cross-flows over tube bundles. The paper demonstrates the shortcomings of both the classical model, which fails to capture large bubbles and pressure fluctuations, and the hybrid model, which is seen to produce fluctuations but is too aggressive in its transition to resolved bubbles. This shows that further developments are needed in terms of pressure fluctuation modeling as well as fundamental hybrid model improvements.

Authors

Institutions

Publication Details

Journal
Nuclear Engineering and Design
Published
2026-11-20
DOI
https://doi.org/10.1016/j.nucengdes.2026.115306
Primary Topic
Fluid Dynamics and Vibration Analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Euler–Euler simulation of flow-induced vibrations of an obstacle in two-phase pipe flow

Sina Tajfirooz, E.M.A. Frederix, Kevin Zwijsen
Nuclear Engineering and Design
Fluid Dynamics and Vibration Analysis
article

Euler–Euler simulation of flow-induced vibrations of an obstacle in two-phase pipe flow

Sina Tajfirooz, E.M.A. Frederix, Kevin Zwijsen
article en

Abstract

Understanding Flow-Induced Vibrations (FIV) is essential for ensuring the safety of steam generators in nuclear power plants. Unchecked vibrations can cause tube wear, fatigue or even failure, posing potential safety risks. In U-tube configurations where two-phase cross-flow is prevalent, these issues become more severe. While this phenomenon has been thoroughly examined in single-phase cross-flow, its behavior in two-phase flows is less understood. The Horizon Europe project GO-VIKING aims to tackle these issues by utilizing experimental setups to investigate two-phase flow-induced vibrations. These facilities emphasize the Fluid-Structure Interaction (FSI) between tube bundles and air–water cross-flows. This paper presents both classical and hybrid Euler–Euler simulations of FIV of a cylindrical obstacle in two-phase pipe flow, as recently experimentally studied in the PILULE experiment performed by Electricité de France R&D. The emphasis of this work lies on the assessment of the two-phase modeling methodology itself, with the flow-induced vibration of the obstacle serving as an application and validation case. The LogMoM model is used for the poly-disperse bubble distribution, including advanced closure models for coalescence and break-up. Particularly in the wake of the obstacle, coalescence and break-up play an important role in the redistribution of void. In turn, drag and lift forces acting on the obstacle are predicted. The presented work contributes to establishing a validated two-phase flow FSI simulation strategy of FIV in cross-flows over tube bundles. The paper demonstrates the shortcomings of both the classical model, which fails to capture large bubbles and pressure fluctuations, and the hybrid model, which is seen to produce fluctuations but is too aggressive in its transition to resolved bubbles. This shows that further developments are needed in terms of pressure fluctuation modeling as well as fundamental hybrid model improvements.

Nuclear Engineering and DesignVol. 461
Nuclear Research and Consultancy Group (NL)
Ministerie van Economische Zaken en Klimaat, Euratom Research and Training Programme, H2020 Euratom
Fluid Dynamics and Vibration Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon