Pulse-Resistance Estimation and Health-Weighted Passive Balancing for a Lithium-Ion Pack

Passive balancing that always bleeds the highest terminal voltage ignores a cell whose resistance has already risen. This paper integrates three steps into one simulated balancing loop: ohmic resistance is estimated from a short load step, a pack-relative health index is built from voltage, resistance, and temperature, and the index ranks the cells for passive bleeding. The estimator is the voltage jump divided by the load current; the polarization voltage remains approximately unchanged when the pulse duration is short relative to the RC time constant. The index is a weighted sum after min-max normalization across the pack, with weights 0.10, 0.80, and 0.10 chosen by correlation with capacity. A cell may be bled only if its rest voltage exceeds the pack minimum by more than 2 mV; among such cells, the one with the highest index, which here means the lowest resistance and temperature, is bled first. A four-cell Thevenin-model battery pack was simulated over 200 charge–rest–discharge cycles. Resistance error against the generating model stayed between 0.83 and 1.73 percent. Without balancing, usable pack capacity fell to 0.889 Ah; the voltage rule and the gated health rule both held it at 1.150 Ah with a mean voltage spread below 1 mV. Bleeding the highest index without the voltage gate drained the healthiest cells and reduced usable capacity to zero. Minimum cell capacity and cycle life were equal under every policy because the fade law does not depend on the bleed. The main contribution lies in integrating these three steps into a unified simulation framework. All results come from simulation.

Authors

Institutions

Publication Details

Journal
Journal of Electrical Engineering and Informatics
Published
2026-11-20
DOI
https://doi.org/10.59562/jeeni.v4i1.15254
Primary Topic
Battery Modeling and Management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Pulse-Resistance Estimation and Health-Weighted Passive Balancing for a Lithium-Ion Pack

Andi Nur Faisal, Azizah Fauziah Misbahuddin
Journal of Electrical Engineering and Informatics
Battery Modeling and Management
article

Pulse-Resistance Estimation and Health-Weighted Passive Balancing for a Lithium-Ion Pack

Andi Nur Faisal, Azizah Fauziah Misbahuddin
article en

Abstract

Passive balancing that always bleeds the highest terminal voltage ignores a cell whose resistance has already risen. This paper integrates three steps into one simulated balancing loop: ohmic resistance is estimated from a short load step, a pack-relative health index is built from voltage, resistance, and temperature, and the index ranks the cells for passive bleeding. The estimator is the voltage jump divided by the load current; the polarization voltage remains approximately unchanged when the pulse duration is short relative to the RC time constant. The index is a weighted sum after min-max normalization across the pack, with weights 0.10, 0.80, and 0.10 chosen by correlation with capacity. A cell may be bled only if its rest voltage exceeds the pack minimum by more than 2 mV; among such cells, the one with the highest index, which here means the lowest resistance and temperature, is bled first. A four-cell Thevenin-model battery pack was simulated over 200 charge–rest–discharge cycles. Resistance error against the generating model stayed between 0.83 and 1.73 percent. Without balancing, usable pack capacity fell to 0.889 Ah; the voltage rule and the gated health rule both held it at 1.150 Ah with a mean voltage spread below 1 mV. Bleeding the highest index without the voltage gate drained the healthiest cells and reduced usable capacity to zero. Minimum cell capacity and cycle life were equal under every policy because the fade law does not depend on the bleed. The main contribution lies in integrating these three steps into a unified simulation framework. All results come from simulation.

Journal of Electrical Engineering and InformaticsVol. 4(1)
State University of Makassar (ID)
Affordable and clean energy
Battery Modeling and Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon