Penerapan DMAIC dalam Upaya Mengurangi Waste Produk pada Line Extruder di PT XYZ

This study was conducted on the Line Extruder production process at PT XYZ, which faced a significant raw material waste problem involving corn flour, exceeding the company’s Key Performance Indicator (KPI) target of 1%. Based on data collected from July to December 2025, the average waste rate reached 3.27%, resulting in a total material loss of 9,330.5 kg and an estimated financial loss of IDR 57,849,100. This study aims to identify the root causes of waste, establish improvement priorities, evaluate the effectiveness of corrective actions based on changes in the waste percentage, and improve raw material utilization efficiency. The methodology employed the DMAIC (Define, Measure, Analyze, Improve, and Control) framework integrated with the Six Sigma approach. The analysis utilized Critical to Quality (CTQ), Pareto diagrams, fishbone diagrams, a prioritization matrix, 5W1H analysis, and Failure Mode and Effects Analysis (FMEA). The findings indicate that the primary sources of waste were machine start-up and shutdown operations, elevated temperatures in the electrical control panel area, and conveyor design. The highest Risk Priority Number (RPN) was 432, associated with panel overheating. Corrective actions were implemented through improvements to the extruder panel cooling system and the installation of a conveyor chute. Following the implementation of these improvements, the usage variance decreased from 3.27% to 0.84%, the panel temperature declined from 39.47°C to 24.97°C, start-up and shutdown waste was reduced to 99.40 kg/day, and material fall-off waste decreased to 4.60 kg/day. These findings demonstrate that the proposed improvements developed through the DMAIC approach effectively reduce material waste and enhance production process efficiency.

Authors

Institutions

Publication Details

Journal
FaST - Jurnal Sains dan Teknologi (Journal of Science and Technology)
Published
2026-11-20
DOI
https://doi.org/10.19166/fastjst.v10i2.11787
Primary Topic
Management and Optimization Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Penerapan DMAIC dalam Upaya Mengurangi Waste Produk pada Line Extruder di PT XYZ

Sylvia Sylvia, Muchammad Razif Junaedi
1 links
FaST - Jurnal Sains dan Teknologi (Journal of Science and Technology)
Management and Optimization Techniques
article

Penerapan DMAIC dalam Upaya Mengurangi Waste Produk pada Line Extruder di PT XYZ

Sylvia Sylvia, Muchammad Razif Junaedi
article en

Abstract

This study was conducted on the Line Extruder production process at PT XYZ, which faced a significant raw material waste problem involving corn flour, exceeding the company’s Key Performance Indicator (KPI) target of 1%. Based on data collected from July to December 2025, the average waste rate reached 3.27%, resulting in a total material loss of 9,330.5 kg and an estimated financial loss of IDR 57,849,100. This study aims to identify the root causes of waste, establish improvement priorities, evaluate the effectiveness of corrective actions based on changes in the waste percentage, and improve raw material utilization efficiency. The methodology employed the DMAIC (Define, Measure, Analyze, Improve, and Control) framework integrated with the Six Sigma approach. The analysis utilized Critical to Quality (CTQ), Pareto diagrams, fishbone diagrams, a prioritization matrix, 5W1H analysis, and Failure Mode and Effects Analysis (FMEA). The findings indicate that the primary sources of waste were machine start-up and shutdown operations, elevated temperatures in the electrical control panel area, and conveyor design. The highest Risk Priority Number (RPN) was 432, associated with panel overheating. Corrective actions were implemented through improvements to the extruder panel cooling system and the installation of a conveyor chute. Following the implementation of these improvements, the usage variance decreased from 3.27% to 0.84%, the panel temperature declined from 39.47°C to 24.97°C, start-up and shutdown waste was reduced to 99.40 kg/day, and material fall-off waste decreased to 4.60 kg/day. These findings demonstrate that the proposed improvements developed through the DMAIC approach effectively reduce material waste and enhance production process efficiency.

FaST - Jurnal Sains dan Teknologi (Journal of Science and Technology)Vol. 10(2)
Pelita Harapan University (ID)
Responsible consumption and production, Industry, innovation and infrastructure
Management and Optimization Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Penerapan DMAIC dalam Upaya Mengurangi Waste Produk pada Line Extruder di PT XYZ — Sylvia Sylvia, Muchammad Razif Junaedi · FaST - Jurnal Sains dan Teknologi (Journal of Science and Technology) (2026) | TGRS Research Map | TGRS