Water Distillation for Light/Heavy Water Detritiation and Heavy Water Upgrading

Water distillation is a mature, simple, and reliable separation technology that is uniquely well suited to address water isotope enrichment/separation encountered in light water– or heavy water–based fission nuclear reactors and fusion fuel cycles. It can be used for light water detritiation, heavy water upgrading, and heavy water detritiation. Although the elementary separation factors of the H/T, H/D, D/T, and 16O/18O isotope pairs are small (1.005 to 1.20 over the 5°C to 70°C operating range), modern advanced water distillation packings (with significantly smaller height equivalent to a theoretical plate) have reduced the required column height by a factor of 3 to 4 relative to conventional CY-type packing, making large-scale implementation increasingly attractive.This article presents a unified approach to three representative cases, using one multicomponent model that tracks all 18 hydrogen and oxygen isotopologues of water: (i) steady-state light water detritiation, (ii) heavy water upgrading combined with detritiation of the light water head product, including a CANDU® 6 primary heat transport (PHT) case in which a small auxiliary column also removes tritium from the upgraded heavy water, and (iii) deep detritiation of a heavy water inventory by Rayleigh batch distillation.The MESH (material balance, equilibrium, summation, enthalpy) equations, the vapor pressure isotope effects, the Rayleigh equation, and a lumped tritium balance for the CANDU moderator and PHT systems are presented in a single consistent notation. The simulations, which predict a detritiation factor (DF) of ≈104 at 25 kg/h for light water detritiation in a 550-stage column, show that, with an enrichment factor of 400 (≈650 theoretical stages at a D2O/DTO separation factor of 1.014), Rayleigh batch distillation can reduce the tritium activity of heavy water from 1 Ci/kg to the virgin D2O level (≈1.3 µCi/kg) while withdrawing only ≈3.3% of the inventory as a ≈30 Ci/kg concentrate at the cost of a large boilup.The analysis shows that the predicted DFs are governed mainly by the separation factors and the number of theoretical stages. Combined steady-state and batch (Rayleigh) operation, therefore, provides a complete toolkit for water isotope management in tritium facilities such as CANDU reactors and ITER.

Authors

Institutions

Publication Details

Journal
Fusion Science & Technology
Published
2026-11-20
DOI
https://doi.org/10.1080/15361055.2026.2754552
Primary Topic
Nuclear reactor physics and engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Water Distillation for Light/Heavy Water Detritiation and Heavy Water Upgrading

Musharaf Rabbani, Anthony Busigin
Fusion Science & Technology
Nuclear reactor physics and engineering
article

Water Distillation for Light/Heavy Water Detritiation and Heavy Water Upgrading

Musharaf Rabbani, Anthony Busigin
article en

Abstract

Water distillation is a mature, simple, and reliable separation technology that is uniquely well suited to address water isotope enrichment/separation encountered in light water– or heavy water–based fission nuclear reactors and fusion fuel cycles. It can be used for light water detritiation, heavy water upgrading, and heavy water detritiation. Although the elementary separation factors of the H/T, H/D, D/T, and 16O/18O isotope pairs are small (1.005 to 1.20 over the 5°C to 70°C operating range), modern advanced water distillation packings (with significantly smaller height equivalent to a theoretical plate) have reduced the required column height by a factor of 3 to 4 relative to conventional CY-type packing, making large-scale implementation increasingly attractive.This article presents a unified approach to three representative cases, using one multicomponent model that tracks all 18 hydrogen and oxygen isotopologues of water: (i) steady-state light water detritiation, (ii) heavy water upgrading combined with detritiation of the light water head product, including a CANDU® 6 primary heat transport (PHT) case in which a small auxiliary column also removes tritium from the upgraded heavy water, and (iii) deep detritiation of a heavy water inventory by Rayleigh batch distillation.The MESH (material balance, equilibrium, summation, enthalpy) equations, the vapor pressure isotope effects, the Rayleigh equation, and a lumped tritium balance for the CANDU moderator and PHT systems are presented in a single consistent notation. The simulations, which predict a detritiation factor (DF) of ≈104 at 25 kg/h for light water detritiation in a 550-stage column, show that, with an enrichment factor of 400 (≈650 theoretical stages at a D2O/DTO separation factor of 1.014), Rayleigh batch distillation can reduce the tritium activity of heavy water from 1 Ci/kg to the virgin D2O level (≈1.3 µCi/kg) while withdrawing only ≈3.3% of the inventory as a ≈30 Ci/kg concentrate at the cost of a large boilup.The analysis shows that the predicted DFs are governed mainly by the separation factors and the number of theoretical stages. Combined steady-state and batch (Rayleigh) operation, therefore, provides a complete toolkit for water isotope management in tritium facilities such as CANDU reactors and ITER.

Fusion Science & Technology
Kinectrics (Canada) (CA)
Clean water and sanitation
Nuclear reactor physics and engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon