From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting

Robotic kiwifruit harvesting requires compact grippers that accommodate fruit-size variation while transmitting sufficient force without excessive stress. This study examined the effects of the compliance constraint, volume fraction, and intermediate pseudo-density threshold on a displacement-driven topology-optimized gripper, then re-optimized a selected layout within a shortened domain and refined critical features. The monolithic PA2200 gripper was manufactured by selective laser sintering and assessed through finite element analysis, stereo digital image correlation, and load-cell testing. The 132 mm × 102 mm × 10 mm prototype weighed 17.96 g. Simulations predicted approximately ±11 mm of unloaded finger motion and per-finger reaction forces of 50.99 and 59.17 N at representative small- and large-fruit positions, respectively. The predicted peak stress reached 27.96 MPa during extended opening, remaining below the allowable stress of 28.2 MPa established using a safety factor of 1.5. With measured input displacements imposed in simulations, trial-averaged mean absolute output-displacement errors were below 0.06 mm. Loaded comparisons using measured input forces and output positions as boundary conditions showed a maximum absolute per-finger force difference of 0.97 N. These results show that the compact design can retain nominal motion and force transmission while satisfying the adopted stress criterion; laboratory comparisons support its local mechanical response under matched conditions but do not establish damage-free fruit handling or harvesting performance.

Authors

Institutions

Publication Details

Journal
Technologies
Published
2026-11-20
DOI
https://doi.org/10.3390/technologies14110771
Primary Topic
Topology Optimization in Engineering
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting

Shen Hin Lim, Ajit Pal Singh, Phan Hung Le, Christoff Venter et al.
2 links
Technologies
Topology Optimization in Engineering
article

From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting

Shen Hin Lim, Ajit Pal Singh, Phan Hung Le, Christoff Venter, Mike Duke, Eva Prinz, Ben McGuinness
article en

Abstract

Robotic kiwifruit harvesting requires compact grippers that accommodate fruit-size variation while transmitting sufficient force without excessive stress. This study examined the effects of the compliance constraint, volume fraction, and intermediate pseudo-density threshold on a displacement-driven topology-optimized gripper, then re-optimized a selected layout within a shortened domain and refined critical features. The monolithic PA2200 gripper was manufactured by selective laser sintering and assessed through finite element analysis, stereo digital image correlation, and load-cell testing. The 132 mm × 102 mm × 10 mm prototype weighed 17.96 g. Simulations predicted approximately ±11 mm of unloaded finger motion and per-finger reaction forces of 50.99 and 59.17 N at representative small- and large-fruit positions, respectively. The predicted peak stress reached 27.96 MPa during extended opening, remaining below the allowable stress of 28.2 MPa established using a safety factor of 1.5. With measured input displacements imposed in simulations, trial-averaged mean absolute output-displacement errors were below 0.06 mm. Loaded comparisons using measured input forces and output positions as boundary conditions showed a maximum absolute per-finger force difference of 0.97 N. These results show that the compact design can retain nominal motion and force transmission while satisfying the adopted stress criterion; laboratory comparisons support its local mechanical response under matched conditions but do not establish damage-free fruit handling or harvesting performance.

TechnologiesVol. 14(11)
University of Waikato (NZ)
Ministry of Business, Innovation and Employment
Topology Optimization in Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
From Topology Optimization to Experimental Verification: Development of a Compact Compliant Gripper for Robotic Kiwifruit Harvesting — Shen Hin Lim, Ajit Pal Singh, et al. · Technologies (2026) | TGRS Research Map | TGRS