Engineering High-Performance ZnO/P3HT Hybrid Heterostructure Diodes: Systematic Layer-Dependent Optimization of Structural, Morphological, and Optical Properties
Hybrid organic-inorganic solar cells combining zinc oxide (ZnO) and poly(3-hexylthiophene) (P3HT) represent a promising avenue for cost-effective photovoltaic technology. This study systematically investigates the fabrication and optimization of ZnO/P3HT heterostructure diodes prepared via sol-gel spin-coating on borosilicate glass substrates. We examine the effects of layer number (4, 6, 8, and 10 layers for ZnO; 2, 3, 4, and 5 layers for P3HT) and calcination temperature on structural, morphological, and optical properties. X-ray diffraction analysis reveals that 8-layer ZnO films yield optimal crystallite size (36.11 nm), minimum internal strain (3.4×10⁻³), and superior hexagonal wurtzite phase formation. For P3HT, 4-layer configuration achieves maximum lamellar ordering with optimal (100) peak intensity (1386.30 cts) and d-spacing of 18.63 Å. Scanning electron microscopy confirms homogeneous, continuous film morphology for optimized configurations. UV-Vis spectroscopy demonstrates excellent optical transparency (> 98% at 800 nm) and optimal bandgap (3.335 eV) for 8-layer ZnO. A thermally-separated fabrication protocol addresses the thermal incompatibility between ZnO calcination (450°C) and P3HT processing (< 195°C degradation threshold). The optimized ZnO (8 layers) /P3HT (4 layers) architecture establishes fundamental design principles for high-performance hybrid photovoltaic devices.
Authors
- K. Dris
- L. Merzougui
- A. Ayeshamariam
- A. Souidi
- M. Benhaliliba
Institutions
- Université des Sciences et de la Technologie d'Oran Mohamed Boudiaf (DZ)
- Bharathidasan University (IN)
- Université de Saida Dr.Moulay Tahar (DZ)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-20
- DOI
- https://doi.org/10.21203/rs.3.rs-11574231/v1
- Primary Topic
- Organic Electronics and Photovoltaics
- Type
- preprint