Medialized Anchors in a Remplissage Repair Increase Glenohumeral Stability Without Significantly Compromising Range of Motion: A Biomechanical Study
PURPOSE: To determine optimal anchor placement within the Hill-Sachs lesion and its effects on glenohumeral joint stability and range of motion (ROM). METHODS: lesion was made to every specimen; subsequently, for defects not initially meeting "off-track" criteria, the Hill-Sachs area was incrementally increased by 25% of the whole humeral head until reaching the threshold for "off-track" lesion. A custom shoulder testing rig connected to an Instron E10000, combined with and C-arm fluoroscopy, was used to test peak force to anterior translation. Subluxation was established when more than 50% of the humeral head was displaced in relation to the glenoid (force required subluxate measured in Newtons), 3-dimensional humeral head displacement (anterior distance to subluxate measured in millimeters) using a MicroScribe, and glenohumeral ROM measured by externally rotating after anterior translation testing by applying a standardized 2.2 Nm external rotation torque under a constant 50-N compressive load, with terminal rotation measured using a goniometer. The testing sequence for each specimen proceeded: (1) intact, (2) posterior capsulotomy, (3) creation of Bankart lesion, (4) creation of the Hill-Sachs lesion, and the order of remplissage repair was then randomized at 3 anchor positions: (5) most lateral, (6) centered, and (7) most medial in the defect. The Bankart lesion was left unrepaired to isolate the biomechanical effects of the Hill-Sachs repair on joint stability. RESULTS: Medial anchor placement provided the greatest stability as shown by a reduced anterior displacement compared with both the native shoulder (estimated ratio = 0.484, 95% confidence interval, 0.289-0.811, P = .006) and lateral anchor placement (estimated ratio = 0.463, 0.277-0.776, P = .004). Lateral and centered anchor placements did not improve stability relative to the native shoulder (P ≥ .825). The force required to produce anterior translation was lowest with lateral anchor placement (estimated ratio = 0.891, 0.799-0.994, P = .040), indicating the least amount of stability. In contrast, medial anchor placement required greater force than lateral and was similar to the native shoulder (P = .441), confirming superior stability. ROM was similar between native shoulders and medial anchor position remplissage (P = .980), whereas centered and lateral anchor positions showed significantly greater ROM than native (P = .0225; P = .0002, respectively). CONCLUSIONS: Medial anchor placement provided the greatest stability without a clinically significant loss of ROM. Centered anchor placement resulted in a slight decrease in stability compared with native but maintained near-normal motion. In contrast, lateral anchor placement produced the least stability and the least restriction of motion. CLINICAL RELEVANCE: Optimizing outcomes in remplissage procedures requires a tailored approach rather than a universal technique. Surgeons should individualize anchor placement based on the specific dimensions of the Hill-Sachs defect and the patient's functional demands. By focusing on restoring an "off-track" shoulder configuration, clinicians can better balance the competing goals of maximizing joint stability and preserving postoperative ROM.
Authors
- Alireza Gholipour (ORCID: https://orcid.org/0000-0002-9395-7148)
- Robert J. Nascimento (ORCID: https://orcid.org/0009-0002-3064-3026)
- Daniel Romero (ORCID: https://orcid.org/0000-0003-1505-3247)
- Augustus D. Mazzocca (ORCID: https://orcid.org/0000-0002-9921-8688)
- Mark P. Cote (ORCID: https://orcid.org/0000-0001-5805-9273)
- Andrew K. Chow (ORCID: https://orcid.org/0009-0000-8385-9838)
- Marco Tulio Di Stefano (ORCID: https://orcid.org/0000-0002-5950-5340)
- M. Young (ORCID: https://orcid.org/0009-0007-4427-6139)
- Sophia Blaine (ORCID: https://orcid.org/0009-0003-5941-4590)
- Peter Baglien
Institutions
- Harvard University (US)
- Mass General Brigham (US)
- Universidad San Francisco de Quito (EC)
Publication Details
- Journal
- Arthroscopy The Journal of Arthroscopic and Related Surgery
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1002/arj.70670
- Primary Topic
- Shoulder Injury and Treatment
- Type
- article
- Field-Weighted Citation Impact
- 0.00