Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It

Residual shear strength is a key parameter in the design and analysis of rock engineering stability problems. The residual friction angle is commonly assumed to be scale independent and constant. This paper investigates the validity of this assumption through a combined experimental and numerical study focused on rough rock discontinuities. Laboratory cyclic shear tests performed on mortar, sandstone and limestone specimens demonstrate that the residual friction angle is not constant but decreases with increasing normal stress. This behaviour is attributed to the progressive degradation of residual asperities that remain active after peak strength mobilisation. The stress dependence of residual friction angle suggests that residual shear strength, like peak shear strength, should exhibit a scale effect due to the inherently scale-dependent nature of surface roughness. To explore this hypothesis, the residual shear strength of four large natural discontinuities was analysed numerically using the Newcastle Discontinuity Shear Strength (NDSS) model. Each surface was subdivided into smaller subsurfaces to assess the influence of scale. The results confirm the existence of a scale effect, showing that residual strength varies significantly between full-scale surfaces and their constituent subsurfaces. Estimates derived from small specimens were found to either overestimate or underestimate the full-scale residual strength by as much as 47% and 85%, respectively. Such large errors highlight the need to estimate residual strength at the scale of the project, not from cores. The Stochastic Approach for Discontinuity Shear Strength (StADSS) was applied to predict residual strength at large scale using limited roughness information from trace data. The method provides predictions that are consistent with those obtained from full surface analyses, demonstrating its capability to account for scale effects in a rigorous and practical manner. The findings of this study emphasise the importance of considering both stress and scale effects when estimating residual shear strength and provide a robust framework for improving its prediction in engineering applications.

Authors

Institutions

Publication Details

Journal
Australian Geomechanics Journal
Published
2026-11-20
DOI
https://doi.org/10.56295/agj6143
Primary Topic
Rock Mechanics and Modeling
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It

Olivier Buzzi, C. Butcher, Andrew Vidler
1 links
Australian Geomechanics Journal
Rock Mechanics and Modeling
article

Residual Shear Strength Of Rock Discontinuities: Why Scale Matters And A New Approach To Predict It

Olivier Buzzi, C. Butcher, Andrew Vidler
article en

Abstract

Residual shear strength is a key parameter in the design and analysis of rock engineering stability problems. The residual friction angle is commonly assumed to be scale independent and constant. This paper investigates the validity of this assumption through a combined experimental and numerical study focused on rough rock discontinuities. Laboratory cyclic shear tests performed on mortar, sandstone and limestone specimens demonstrate that the residual friction angle is not constant but decreases with increasing normal stress. This behaviour is attributed to the progressive degradation of residual asperities that remain active after peak strength mobilisation. The stress dependence of residual friction angle suggests that residual shear strength, like peak shear strength, should exhibit a scale effect due to the inherently scale-dependent nature of surface roughness. To explore this hypothesis, the residual shear strength of four large natural discontinuities was analysed numerically using the Newcastle Discontinuity Shear Strength (NDSS) model. Each surface was subdivided into smaller subsurfaces to assess the influence of scale. The results confirm the existence of a scale effect, showing that residual strength varies significantly between full-scale surfaces and their constituent subsurfaces. Estimates derived from small specimens were found to either overestimate or underestimate the full-scale residual strength by as much as 47% and 85%, respectively. Such large errors highlight the need to estimate residual strength at the scale of the project, not from cores. The Stochastic Approach for Discontinuity Shear Strength (StADSS) was applied to predict residual strength at large scale using limited roughness information from trace data. The method provides predictions that are consistent with those obtained from full surface analyses, demonstrating its capability to account for scale effects in a rigorous and practical manner. The findings of this study emphasise the importance of considering both stress and scale effects when estimating residual shear strength and provide a robust framework for improving its prediction in engineering applications.

Australian Geomechanics JournalVol. 61(4)
University of Newcastle Australia (AU)
Rock Mechanics and Modeling
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon