Buckled Silver Microflake Conductors With In Situ‐Generated Ag–O Coordination Enable 3D‐Printed Stretchable Cardiac Bioelectrodes
Metallic pacemaker electrodes risk myocardial injury during implantation, while silver micro‐flakes (AgMFs), despite excellent conductivity, are too rigid for stretchable devices without proper composite/device engineering. Here, we present a synergistic strategy to fabricate fully stretchable, electrically stable, and crack‐resistant cardiac electrodes by integrating AgMF‐based ink with metal‐organic interfacial bonding, biaxial buckling, and wet‐adhesive hydrogels. In situ‐generated Ag–O coordination of silver nanoparticles (AgNPs) in the polymer matrix/conductor dissipates stress and suppresses crack propagation, effectively compensating for AgMF rigidity and enabling intact buckled microstructures. The resulting electrodes exhibit high conductivity (∼2.1 × 10 4 S cm −1 ) and stable resistance under 50% cyclic strain, exceeding cardiac motion requirements (15%–20%). The ink is 3D‐printable into mesh electrodes and can be integrated with wet‐adhesive hydrogels to form puncture‐free, stretchable metallic cardiac bioelectrodes with excellent biosafety, offering a promising route toward leadless pacemakers and long‐term wireless cardiac monitoring. A multiscale synergistic strategy integrating metal‐organic interfacial bonding with stretch‐release‐induced buckled architectures enables silver microflake conductors with simultaneously high conductivity and large deformability, demonstrated for 3D printing of bioadaptive, puncture‐free cardiac electrodes and stretchable wireless coils for dynamic cardiac stimulation and long‐term electrophysiological monitoring.
Authors
- Luyizheng Shuai
- Zunfeng Liu (ORCID: https://orcid.org/0000-0002-7366-0275)
- Shaoli Fang (ORCID: https://orcid.org/0009-0008-2669-9581)
- Jingchao Lu (ORCID: https://orcid.org/0000-0002-6946-0086)
- Tong Zou (ORCID: https://orcid.org/0000-0003-2918-2488)
- Dong Qian (ORCID: https://orcid.org/0000-0001-9367-0924)
- Xiaoyu Hu
- Boren Zhou
- Wenjin Guo
- Jingjing Li
- Enzhao Liu
- Kaiyu Yuan
- Xiang Zhou
Institutions
- China Pharmaceutical University (CN)
- The University of Texas at Dallas (US)
- Tiangong University (CN)
- Nankai University (CN)
- Second Hospital of Hebei Medical University (CN)
- Beijing Hospital (CN)
- Wuhan Textile University (CN)
- Second Hospital of Tianjin Medical University (CN)
- State Key Laboratory of Medicinal Chemical Biology (CN)
- Tianjin Medical University (CN)
Publication Details
- Journal
- Advanced Materials
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1002/adma.75584
- Primary Topic
- Nanomaterials and Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Tianjin Science and Technology Program
- High Energy Photon Source