Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites

Developing high-performance and eco-friendly oil additives capable of operating under extreme-pressure conditions remains a vital challenge for advanced mechanical systems. This work investigates whether combining layered black phosphorus (BP) with fullerene (C60) can improve lubrication performance beyond that achieved with either additive alone, and examines the possible physicochemical origins of the observed effects. BP–C60 nanocomposites were prepared by liquid-phase exfoliation followed by ball milling, and their performance in polyalphaolefin (PAO4) was evaluated by tribological testing and wear-surface characterization, together with molecular dynamics (MD) simulations. At an optimal mass ratio of 2:3, the lubricant achieves a 24% reduction in average coefficient of friction (COF) and an 81.2% decrease in wear rate compared to pure PAO4. Furthermore, under extreme contact pressures (828–1314 MPa), the composite system delivers load-bearing capacity, yielding a minimum average COF of 0.0881 and up to an 87.1% reduction in wear rate. Wear-surface characterization reveals that mechanical shear and frictional heat induce the in situ formation of dense, 33.0–72.6 nm tribofilms consisting of iron oxides (Fe2O3, Fe3O4), iron carbide (Fe–C), amorphous carbon, and oxidized phosphorus species (P–O/P═O). MD simulations showed lower interfacial shear stress for the BP–C60 system and detected relative motion of the lubricant components, as well as rotation and orientation changes of C60. Together, the experimental and simulation results suggest that BP shear accommodation, C60 interfacial motion, and tribofilm formation may contribute to the improved lubrication performance. This work demonstrates the performance of the BP–C60 additive under the tested conditions and provides a basis for further application under more demanding operating conditions.

Authors

Institutions

Publication Details

Journal
Langmuir
Published
2026-11-20
DOI
https://doi.org/10.1021/acs.langmuir.6c05082
Primary Topic
Lubricants and Their Additives
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites

Fanfan Lv, Wei Wang, Yuan Gao, Kuaishe Wang
2 links
Langmuir
Lubricants and Their Additives
article

Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites

Fanfan Lv, Wei Wang, Yuan Gao, Kuaishe Wang
article en

Abstract

Developing high-performance and eco-friendly oil additives capable of operating under extreme-pressure conditions remains a vital challenge for advanced mechanical systems. This work investigates whether combining layered black phosphorus (BP) with fullerene (C60) can improve lubrication performance beyond that achieved with either additive alone, and examines the possible physicochemical origins of the observed effects. BP–C60 nanocomposites were prepared by liquid-phase exfoliation followed by ball milling, and their performance in polyalphaolefin (PAO4) was evaluated by tribological testing and wear-surface characterization, together with molecular dynamics (MD) simulations. At an optimal mass ratio of 2:3, the lubricant achieves a 24% reduction in average coefficient of friction (COF) and an 81.2% decrease in wear rate compared to pure PAO4. Furthermore, under extreme contact pressures (828–1314 MPa), the composite system delivers load-bearing capacity, yielding a minimum average COF of 0.0881 and up to an 87.1% reduction in wear rate. Wear-surface characterization reveals that mechanical shear and frictional heat induce the in situ formation of dense, 33.0–72.6 nm tribofilms consisting of iron oxides (Fe2O3, Fe3O4), iron carbide (Fe–C), amorphous carbon, and oxidized phosphorus species (P–O/P═O). MD simulations showed lower interfacial shear stress for the BP–C60 system and detected relative motion of the lubricant components, as well as rotation and orientation changes of C60. Together, the experimental and simulation results suggest that BP shear accommodation, C60 interfacial motion, and tribofilm formation may contribute to the improved lubrication performance. This work demonstrates the performance of the BP–C60 additive under the tested conditions and provides a basis for further application under more demanding operating conditions.

Langmuir
Xi'an University of Architecture and Technology (CN)
National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province, Xi'an Municipal Bureau of Science and Technology, Education Department of Shaanxi Province, Shaanxi Provincial Science and Technology Department, Key Research and Development Projects of Shaanxi Province
Lubricants and Their Additives
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon