Effects of log diameter and tree species on noise and hand-arm vibration levels during log bucking with battery and petrol-powered chainsaws
Introduction In forestry, motor manual chainsaw operations not only involve a high risk of occupational accidents but also long-term exposure to noise, vibration, and carbon monoxide among workers. Advances in battery technology have increased the use of battery-powered chainsaws as an alternative to internal combustion chainsaws in forestry. Methods The objective of this study was to determine the noise and hand-arm vibration (HAV) exposure levels of operators during log bucking when using different chainsaw models, which are commonly used in forestry. Accordingly, operator exposure to noise and hand-arm vibration was examined during the log bucking of debarked black pine and fir logs in two diameter classes (20–30 and 30–40 cm), using two battery-powered chainsaw models (Stihl MSA 300C and Husqvarna 535i XP) and one petrol-powered model (Husqvarna 372 XP). Results The operator’s 8-h daily hand-arm vibration exposure levels, A(8), were determined to be 3.79, 3.89, and 4.00 m/s 2 for the Husqvarna 535i XP, Stihl MSA 300C and Husqvarna 372 XP, respectively. The daily personal noise exposure levels, LEX,8 h, were 90.62, 97.75 and 102.12 dB(A), respectively. Discussion The main effect of continuous log diameter and all interactions involving diameter were statistically significant for vibration exposure, while only the main effect of chainsaw model was statistically significant for noise exposure.
Authors
- Kıvanç Yüksel (ORCID: https://orcid.org/0000-0001-9660-5028)
Institutions
- Kahramanmaraş Sütçü İmam University (TR)
Publication Details
- Journal
- Frontiers in Forests and Global Change
- Published
- 2026-11-20
- DOI
- https://doi.org/10.3389/ffgc.2026.2009394
- Primary Topic
- Occupational Health and Safety in Workplaces
- Type
- article
- Field-Weighted Citation Impact
- 0.00