Integration of tribological analysis and machine- learning models to increase the useful life of hammers in sugarcane shredders

The cane shredder is one of the most maintenance-intensive and costly machines in the preparation and milling process, requiring hammer replacements every 15–25 days, taking approximately 2–4 hours for that work and causing up to 20 annual stoppages. Hammer wear impacts machine balance, potentially accelerating maintenance, but also affects cane preparation quality and sucrose extraction efficiency. Up to 12 t of welding material is consumed annually for hammer recovery and hardfacing. The study was conducted to enhance the performance and useful life of cane shredder hammers in the sugar industry by characterizing hardfacing’s abrasion and impact resistance and exploring predictive maintenance strategies. Chromium white cast iron welds were analyzed by using scanning electron microscopy to estimate carbide volume fractions and sizes, while abrasion and impact resistance were tested according to ASTM G65 and E23 standards. Data from 43 machine runs over 20 months were collected, cleaned, and used to develop a machine learning-based predictive maintenance model using machine signals such as vibration, current, and others. Carbide volume fractions between 3.7% and 36.7%, with wear losses ranging from 0.2 to 1.9 g, indicating a strong inverse correlation between carbide fraction and wear. Impact resistance varied from 4.4 to 65.4 J. The predictive maintenance model achieved over 60% accuracy, providing 1–5 days advance notice of hammer replacement. The study concluded that higher carbide fractions improve abrasion resistance, while impact resistance is largely influenced by the base material and carbide distribution, with smaller and more homogeneous carbides offering better impact resistance. Chromium-manganese-based welds provided superior impact resistance compared to carbon-steel coatings. Industry 4.0 technologies offer practical solutions to optimize hammer maintenance, enabling timely hammer replacements and enhancing efficiency and cost-effectiveness in sugar mills.

Authors

Publication Details

Journal
Sugar Industry international
Published
2026-11-20
DOI
https://doi.org/10.36961/si35412
Primary Topic
Metal Alloys Wear and Properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Integration of tribological analysis and machine- learning models to increase the useful life of hammers in sugarcane shredders

Esteban Rosero, Julian David Montes, Nicolás Gil, Juan Manuel Pineda et al.
1 links
Sugar Industry international
Metal Alloys Wear and Properties
article

Integration of tribological analysis and machine- learning models to increase the useful life of hammers in sugarcane shredders

Esteban Rosero, Julian David Montes, Nicolás Gil, Juan Manuel Pineda, Sebastián Mera
article en

Abstract

The cane shredder is one of the most maintenance-intensive and costly machines in the preparation and milling process, requiring hammer replacements every 15–25 days, taking approximately 2–4 hours for that work and causing up to 20 annual stoppages. Hammer wear impacts machine balance, potentially accelerating maintenance, but also affects cane preparation quality and sucrose extraction efficiency. Up to 12 t of welding material is consumed annually for hammer recovery and hardfacing. The study was conducted to enhance the performance and useful life of cane shredder hammers in the sugar industry by characterizing hardfacing’s abrasion and impact resistance and exploring predictive maintenance strategies. Chromium white cast iron welds were analyzed by using scanning electron microscopy to estimate carbide volume fractions and sizes, while abrasion and impact resistance were tested according to ASTM G65 and E23 standards. Data from 43 machine runs over 20 months were collected, cleaned, and used to develop a machine learning-based predictive maintenance model using machine signals such as vibration, current, and others. Carbide volume fractions between 3.7% and 36.7%, with wear losses ranging from 0.2 to 1.9 g, indicating a strong inverse correlation between carbide fraction and wear. Impact resistance varied from 4.4 to 65.4 J. The predictive maintenance model achieved over 60% accuracy, providing 1–5 days advance notice of hammer replacement. The study concluded that higher carbide fractions improve abrasion resistance, while impact resistance is largely influenced by the base material and carbide distribution, with smaller and more homogeneous carbides offering better impact resistance. Chromium-manganese-based welds provided superior impact resistance compared to carbon-steel coatings. Industry 4.0 technologies offer practical solutions to optimize hammer maintenance, enabling timely hammer replacements and enhancing efficiency and cost-effectiveness in sugar mills.

Sugar Industry international
Industry, innovation and infrastructure, Responsible consumption and production
Metal Alloys Wear and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon