Bioleaching assisted multiple metal recovery from printed circuit boards
Electronic waste (e-waste) generation is increasing rapidly, highlighting the need for sustainable recovery of valuable metals. Printed circuit boards (PCBs) are particularly rich in both precious and hazardous metals, necessitating efficient extraction methods. In this study, we present a two-step bioleaching and chemical precipitation approach to recover multiple metals from alkali-pretreated mobile phone PCBs using an acidophilic bacterial strain isolated from sewage sludge. The strain was acclimated over six successive cycles to highly acidic conditions, demonstrated by pH reduction of the medium to pH 1, and Fe 2+ oxidation to Fe 3+ . Subsequent bioleaching achieved significant metal solubilisation from the PCBs: Ni 99.32 ± 0.09% > Cu 69.73 ± 0.43% > Al 33.88 ± 0.01% > Zn 27.56 ± 0.01% >Pb 3.27 ± 0.01 %. The resulting acidic bioleachate was neutralised with NaOH, precipitating metals non-selectively with an overall recovery efficiency exceeding 94%. This approach offers a sustainable and environmentally benign route for multi-metal recovery from e-waste, supporting circular economy and resource management initiatives.
Authors
- Mohanakrishnan Logan (ORCID: https://orcid.org/0000-0003-4388-163X)
- Rajalakshmi Sridharan (ORCID: https://orcid.org/0000-0002-7194-3669)
- Shinjini Sen (ORCID: https://orcid.org/0009-0006-8830-1677)
- Piet. N. L. Lens
Institutions
- Ollscoil na Gaillimhe – University of Galway (IE)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-20
- DOI
- https://doi.org/10.21203/rs.3.rs-11593906/v1
- Primary Topic
- Recycling and Waste Management Techniques
- Type
- preprint