Refined characterisation of the tensile behaviour of strain-hardening fibre-reinforced concrete
This paper proposes and evaluates a mechanically consistent inverse analysis procedure for deriving an idealised uniaxial tensile response of strain-hardening fibre-reinforced concrete from four-point bending prism tests. In contrast to a conventional point-by-point reconstruction, the measured flexural states are treated simultaneously in an overdetermined least-squares problem to identify a compact piecewise linear tensile stress–strain relationship. Two practical variants are considered: a reference formulation using the measured neutral-axis position and a simplified formulation in which the neutral-axis history is recovered iteratively from a known compressive elastic modulus. The strain-node abscissae can also be optimised by minimising the flexural residual, so that only the desired constitutive resolution needs to be prescribed. The approach is assessed using 18 four-point bending tests on Ductal® UHPFRC prisms of two geometries, with high-resolution digital image correlation used both as input and to test the underlying kinematic assumptions. The method reproduces the measured flexural response and identifies the strain-hardening range robustly with only a few constitutive nodes. After localisation, the stress–strain branch is interpreted as a gauge-length-dependent regularised response and can be recast as an equivalent stress-crack opening relationship for design-oriented use. Provided that a reliable elastic modulus is known, practical pre-localisation characterisation can be obtained from a single high-resolution displacement measurement on the tension side.
Authors
- Walter Kaufmann (ORCID: https://orcid.org/0000-0002-8415-4896)
- Nicola Gehri (ORCID: https://orcid.org/0000-0002-0321-7446)
- Ali Amin (ORCID: https://orcid.org/0000-0002-9088-8634)
Publication Details
- Journal
- Materials and Structures
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1617/s11527-026-03348-2
- Primary Topic
- Innovative concrete reinforcement materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Australian Research Council