Desenvolvimento e controle de um robô equilibrista baseado em pêndulo invertido utilizando ESP32 e controlador PID
This work presents the development of a two-wheeled inverted pendulum robot, featuring automatic control for stabilization in an upright position. The prototype was built using an ESP32 microcontroller, an MPU6050 sensor, DC motors, and an L298N H-bridge. The system employs a proportional-integral-derivative (PID) controller, which adjusts motor actuation based on an inclination estimate derived from a complementary filter applied to data from an accelerometer and a gyroscope. The development process encompassed mechanical and electronic assembly, microcontroller programming, and the experimental tuning of control parameters. During testing without external support, the robot remained balanced, without falling, moving forward and backward as it corrected its tilt and returned to an equilibrium position. The results demonstrate the system's ability to maintain balance under the tested conditions, providing a practical application of concepts regarding sensors, actuators, and closed-loop control for the stabilization of an inherently unstable system.
Authors
- Josieudo Pereira Gaião
- Fernanda Ketlyn de Farias Moura
- Maria Daiane Bernardo Batista
Institutions
- Instituto Federal de Educação, Ciência e Tecnologia de Rondônia (BR)
Publication Details
- Journal
- Revista fisio&terapia.
- Published
- 2026-11-20
- DOI
- https://doi.org/10.69849/7jv1g061
- Primary Topic
- Control and Dynamics of Mobile Robots
- Type
- article
- Field-Weighted Citation Impact
- 0.00