Separating saturable ground from metal targets in a pulse induction metal detector using two transmit current levels: public prior-art disclosure with construction example
Public technical disclosure made to establish prior art, published 20 November 2026. A time-domain (pulse induction or constant-current) metal detector transmits sub-frames at two or more coil current amplitudes, I and kI, whose current waveforms are scaled copies of one another. The supply voltage and the back-EMF clamp voltage are both switched in the ratio k so that the on-time and the current fall time are identical at both amplitudes. Receive samples are taken at the same delays in every sub-frame. With S1 and S2 the samples at the two amplitudes, N = (S2 - k S1)/(k^p - k) cancels every response proportional to transmit current and leaves the field-dependent (saturable, non-linear) ground response. L = (k^p S1 - S2)/(k^p - k) cancels the non-linear response and leaves the linear response containing the metal target signal. p = 2 in the Rayleigh region; a third amplitude lets p be measured. The non-linear channel is also used to blend the cancellation in only when needed, to control transmit current automatically, to indicate coil height above the ground, and to indicate ferrous targets. The document is laid out like a patent specification and includes a worked numerical example and a construction example a technician can follow: coil winding, parts with ratings, connections, timing table, set-up and calibration steps (300 uH coil, -5 V and -10.5 V rails, 91 V and 191 V switched clamp, k = 2.1). Twelve numbered embodiments state each variant. Published so that these methods are prior art that anyone can use.
Authors
- Peter Woodland
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-20
- DOI
- https://doi.org/10.5281/zenodo.24387568
- Primary Topic
- Geophysical Methods and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00