Research on the Design of Composite Battery Thermal Management System Based on PCM-Finned-Liquid Cooling Plate
This study takes the 18650 cylindrical lithium-ion battery pack as the research object. Aiming at the problems of low heat conduction efficiency of the single heat dissipation system of the battery pack and easy failure under high-rate discharge, a composite enhanced heat transfer scheme based on PCM-Fin-Liquid cooling plate is proposed. By comparing and analyzing the temperature control effects of pure phase change cooling, fin-enhanced phase change cooling and composite cooling under 5C high-rate discharge conditions, the technical advantages of the composite cooling scheme are verified. The results show that when the pure phase change material scheme is adopted, the maximum temperature exceeds 326 K. After aluminum fins are implanted in the phase change material, the average temperature of the battery drops to 321.85 K, and the maximum temperature drops to 324.28 K, which are 0.42 K and 0.47 K lower than those of the pure phase change material heat dissipation system, respectively. After the liquid cooling plate is added, the maximum temperature of the battery pack is reduced to below 318 K by the composite cooling system, which is more than 8 K lower than the pure phase change scheme. In addition, considering the influence of the liquid cooling plate structure, cooling liquid flow rate, inlet temperature and ambient temperature on the heat dissipation performance of the composite system, a comprehensive evaluation index θ is constructed by using the weighted normalization method to determine the optimal values of the key parameters in the composite cooling system.
Authors
- Xiuhe Song
- Anhui Yu
- Zheng Ji
- Zhiwen Wang
- Jing Zhao
- Ping Liu
Institutions
- Anhui University of Science and Technology (CN)
- Institute of Energy, Hefei Comprehensive National Science Center (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-20
- DOI
- https://doi.org/10.21203/rs.3.rs-11700043/v1
- Primary Topic
- Battery Modeling and Management
- Type
- preprint