Effect of aluminum oxide nanofibers addition on the mechanical strength and microwave dielectric properties of Ba0.96Sr0.04(Sm0.8Nd0.2)2Ti4O12 microwave ceramics

Current trends in miniaturization of electronic equipment together with increasing reliability requirements impose new and more stringent demands on the mechanical properties of microwave ceramics. The effect of aluminum oxide nanofibers (γ-Al 2 O 3 ) addition on the mechanical strength and microwave dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 was studied. Experimental samples were prepared by the solid-state method using barium and strontium carbonates, oxides of titanium, samarium and neodymium as starting materials. Calcination was carried out at 1150°C, while sintering was performed at 1400°C. To improve the mechanical strength of the ceramics, aluminum oxide nanofibers were introduced during grinding of the ceramic mixture in amounts of 0.1 – 0.2 % wt. X-ray diffraction analysis showed that the obtained ceramic samples were single-phase and had an oxide pseudo-tungsten bronze structure. The addition of 0.1 % wt. nanofibers reduced the porosity of the ceramic material (from 5.0 to 4.0%) relative to the undoped material, which led to an increase in flexural strength (from 172 to 202 MPa). The permittivity and dielectric loss tangent decreased slightly (from 78.0 to 77.0 and from 4.0 × 10 –4 to 3.9 × 10 –4 ) while the temperature coefficient of resonant frequency shifted toward negative values (from –0.63 to –7.37 ppm/K) with the addition of the nano-additive. It was found that aluminum oxide nanofiber addition (γ-Al 2 O 3 ) has a significant effect on the mechanical and dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 ceramics. The obtained results can be used in the production of ceramic components for microwave devices to optimize their stability and reliability.

Authors

Institutions

Publication Details

Journal
Industrial laboratory Diagnostics of materials
Published
2026-11-20
DOI
https://doi.org/10.26896/1028-6861-2026-92-11-49-55
Primary Topic
Microwave Dielectric Ceramics Synthesis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of aluminum oxide nanofibers addition on the mechanical strength and microwave dielectric properties of Ba0.96Sr0.04(Sm0.8Nd0.2)2Ti4O12 microwave ceramics

A. F. Shimanskii, A. N. Gorodishcheva, A. N. Masyugin, A. V. Pavlov et al.
Industrial laboratory Diagnostics of materials
Microwave Dielectric Ceramics Synthesis
article

Effect of aluminum oxide nanofibers addition on the mechanical strength and microwave dielectric properties of Ba0.96Sr0.04(Sm0.8Nd0.2)2Ti4O12 microwave ceramics

A. F. Shimanskii, A. N. Gorodishcheva, A. N. Masyugin, A. V. Pavlov, E. Yu. Podshibyakina, Y. V. Kazantsev, T. Yu. Shumilov
article en

Abstract

Current trends in miniaturization of electronic equipment together with increasing reliability requirements impose new and more stringent demands on the mechanical properties of microwave ceramics. The effect of aluminum oxide nanofibers (γ-Al 2 O 3 ) addition on the mechanical strength and microwave dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 was studied. Experimental samples were prepared by the solid-state method using barium and strontium carbonates, oxides of titanium, samarium and neodymium as starting materials. Calcination was carried out at 1150°C, while sintering was performed at 1400°C. To improve the mechanical strength of the ceramics, aluminum oxide nanofibers were introduced during grinding of the ceramic mixture in amounts of 0.1 – 0.2 % wt. X-ray diffraction analysis showed that the obtained ceramic samples were single-phase and had an oxide pseudo-tungsten bronze structure. The addition of 0.1 % wt. nanofibers reduced the porosity of the ceramic material (from 5.0 to 4.0%) relative to the undoped material, which led to an increase in flexural strength (from 172 to 202 MPa). The permittivity and dielectric loss tangent decreased slightly (from 78.0 to 77.0 and from 4.0 × 10 –4 to 3.9 × 10 –4 ) while the temperature coefficient of resonant frequency shifted toward negative values (from –0.63 to –7.37 ppm/K) with the addition of the nano-additive. It was found that aluminum oxide nanofiber addition (γ-Al 2 O 3 ) has a significant effect on the mechanical and dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 ceramics. The obtained results can be used in the production of ceramic components for microwave devices to optimize their stability and reliability.

Industrial laboratory Diagnostics of materialsVol. 92(11)
Siberian Federal University (RU)
Microwave Dielectric Ceramics Synthesis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Effect of aluminum oxide nanofibers addition on the mechanical strength and microwave dielectric properties of Ba0.96Sr0.04(Sm0.8Nd0.2)2Ti4O12 microwave ceramics — A. F. Shimanskii, A. N. Gorodishcheva, et al. · Industrial laboratory Diagnostics of materials (2026) | TGRS Research Map | TGRS