Frequency-Dependent Electrical Behavior of Al/CuO/n-Si Schottky Barrier Diodes: Interface-State Analysis and Series-Resistance Effects

In this work, an Al/CuO/n-Si/Ag heterostructure was fabricated using physical vapor deposition and radio-frequency sputtering. Its voltage- and frequency-dependent electrical properties were systematically investigated from capacitance–voltage ( C-V ) and conductance–voltage ( G/ω-V ) measurements performed over a wide range of frequencies and applied voltages. The electronic parameters were also analyzed at different frequencies to investigate how they change with frequency. The interface trap density (Nit ) values were obtained using the low-high frequency capacitance ( C LF -C HF ) model, the Hill–Coleman method, and the parallel conduction method. The results showed a strong dependence of capacitance and conductance on both applied voltage and frequency, particularly at low and intermediate frequencies. The observed dispersion is mainly related to the response of the interface states and dielectric relaxation, while the effect of the series resistance becomes more evident at higher frequencies and in the accumulation region. The barrier height ( Φ B ), depletion width ( W D ), and electric field ( E m ) obtained from the measurements showed a clear dependence on frequency. Since the effect of series resistance becomes more significant at high frequencies, the 1 MHz data were corrected for the series resistance before further analysis. The analysis shows that Nit has a stronger effect on the device response in the depletion and inversion regions at low frequencies. At high frequencies, the effect of series resistance plays a dominant role, particularly in the accumulation region. The values of Nit obtained from the three methods were not the same, showing that the calculated interface-state density can vary depending on the model and measurement conditions. Therefore, both interface states and series resistance need to be considered when analyzing the electrical characteristics of CuO/n-Si-based Schottky diode structures.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-20
DOI
https://doi.org/10.21203/rs.3.rs-11658301/v1
Primary Topic
Semiconductor materials and interfaces
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Frequency-Dependent Electrical Behavior of Al/CuO/n-Si Schottky Barrier Diodes: Interface-State Analysis and Series-Resistance Effects

Fatih Mehmet Coşkun, İdris Candan, Sait Eren San, Ş. Altındal et al.
Research Square
Semiconductor materials and interfaces
preprint

Frequency-Dependent Electrical Behavior of Al/CuO/n-Si Schottky Barrier Diodes: Interface-State Analysis and Series-Resistance Effects

Fatih Mehmet Coşkun, İdris Candan, Sait Eren San, Ş. Altındal, Sabreen A. Hameed, AL-EDRESİ Abeer
preprint en

Abstract

In this work, an Al/CuO/n-Si/Ag heterostructure was fabricated using physical vapor deposition and radio-frequency sputtering. Its voltage- and frequency-dependent electrical properties were systematically investigated from capacitance–voltage ( C-V ) and conductance–voltage ( G/ω-V ) measurements performed over a wide range of frequencies and applied voltages. The electronic parameters were also analyzed at different frequencies to investigate how they change with frequency. The interface trap density (Nit ) values were obtained using the low-high frequency capacitance ( C LF -C HF ) model, the Hill–Coleman method, and the parallel conduction method. The results showed a strong dependence of capacitance and conductance on both applied voltage and frequency, particularly at low and intermediate frequencies. The observed dispersion is mainly related to the response of the interface states and dielectric relaxation, while the effect of the series resistance becomes more evident at higher frequencies and in the accumulation region. The barrier height ( Φ B ), depletion width ( W D ), and electric field ( E m ) obtained from the measurements showed a clear dependence on frequency. Since the effect of series resistance becomes more significant at high frequencies, the 1 MHz data were corrected for the series resistance before further analysis. The analysis shows that Nit has a stronger effect on the device response in the depletion and inversion regions at low frequencies. At high frequencies, the effect of series resistance plays a dominant role, particularly in the accumulation region. The values of Nit obtained from the three methods were not the same, showing that the calculated interface-state density can vary depending on the model and measurement conditions. Therefore, both interface states and series resistance need to be considered when analyzing the electrical characteristics of CuO/n-Si-based Schottky diode structures.

Research Square
Kocaeli Üniversitesi (TR), Istanbul Medeniyet University (TR), Gazi University (TR)
Kocaeli Üniversitesi
Semiconductor materials and interfaces
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon