Time-Series InSAR-Constrained Spatiotemporal Evolution and Driving Factors of a Loess Landslide: A Case Study of the Li-Kan Highway Landslide on the Loess Plateau

Loess landslides exhibit strong spatial heterogeneity and complex rainfall responses, making their evolution difficult to characterize from one-dimensional deformation observations alone. This study investigates the Li-Kan Highway landslide on the right bank of the Lijiaxia Reservoir, China, by integrating ascending- and descending-track time-series InSAR, aspect-parallel flow (APF) constrained three-dimensional deformation reconstruction, the Comprehensive Standardized Deformation Index (CSDI), wavelet-based rainfall-response analysis, and Massflow numerical simulation. The reconstructed deformation field shows that the landslide is dominated by northeastward horizontal motion, while local sectors exhibit distinct movement directions and deformation components, indicating multiple kinematic units. Along the approximately 2 km P–P′ profile, the north–south, east–west, and vertical deformation–velocity components exhibit spatially variable patterns, consistent with heterogeneous slope kinematics. Principal component analysis shows that the first two components explain 85.6% of the total variance, summarizing the spatial variability. CSDI analysis of representative points P1–P3 reveals asynchronous deformation activity: P1 is mainly active in autumn 2018, P2 shows enhanced activity in 2019 and spring–summer 2020, and P3 exhibits a weaker local increase around mid-2021. In particular, the 2020 response at P2 is interpreted as a local kinematic adjustment rather than synchronous acceleration of the entire slope. Because no overall failure occurred during the observation period, CSDI-defined Stage III is treated as enhanced deformation activity rather than a direct failure criterion. Continuous wavelet transform and time-lag cross-correlation indicate significant rainfall-related temporal responses, with deformation lagging rainfall by approximately 12, 108, and 36 days at P1, P2, and P3, respectively. Massflow simulation of a potential frontal failure scenario shows a rapid transition from source-area release to channelized high-speed runout and frontal deposition. The maximum simulated velocity reaches approximately 22.6 m/s in the main transport channel, while the frontal deposit exceeds 16 m in thickness and remains about 13.6 m at 200 s. The total simulated mass decreases by only about 0.38%, indicating good numerical mass conservation. These results demonstrate that the Li-Kan Highway landslide evolves through spatially heterogeneous and temporally asynchronous deformation, with rainfall responses varying among slope sectors. The integrated framework links long-term deformation monitoring, stage identification, rainfall-response analysis, and potential failure simulation, providing a practical basis for interpreting the evolution and hazard potential of large loess landslides.

Authors

Institutions

Publication Details

Journal
Remote Sensing
Published
2026-11-20
DOI
https://doi.org/10.3390/rs18223992
Primary Topic
Landslides and related hazards
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Time-Series InSAR-Constrained Spatiotemporal Evolution and Driving Factors of a Loess Landslide: A Case Study of the Li-Kan Highway Landslide on the Loess Plateau

Wu Zhu, Yue Wang, Zhaojun Pang, Yuxin Zhou et al.
4 links
Remote Sensing
Landslides and related hazards
article

Time-Series InSAR-Constrained Spatiotemporal Evolution and Driving Factors of a Loess Landslide: A Case Study of the Li-Kan Highway Landslide on the Loess Plateau

Wu Zhu, Yue Wang, Zhaojun Pang, Yuxin Zhou, Haoran Gao, Xiaoyu Liu
article en

Abstract

Loess landslides exhibit strong spatial heterogeneity and complex rainfall responses, making their evolution difficult to characterize from one-dimensional deformation observations alone. This study investigates the Li-Kan Highway landslide on the right bank of the Lijiaxia Reservoir, China, by integrating ascending- and descending-track time-series InSAR, aspect-parallel flow (APF) constrained three-dimensional deformation reconstruction, the Comprehensive Standardized Deformation Index (CSDI), wavelet-based rainfall-response analysis, and Massflow numerical simulation. The reconstructed deformation field shows that the landslide is dominated by northeastward horizontal motion, while local sectors exhibit distinct movement directions and deformation components, indicating multiple kinematic units. Along the approximately 2 km P–P′ profile, the north–south, east–west, and vertical deformation–velocity components exhibit spatially variable patterns, consistent with heterogeneous slope kinematics. Principal component analysis shows that the first two components explain 85.6% of the total variance, summarizing the spatial variability. CSDI analysis of representative points P1–P3 reveals asynchronous deformation activity: P1 is mainly active in autumn 2018, P2 shows enhanced activity in 2019 and spring–summer 2020, and P3 exhibits a weaker local increase around mid-2021. In particular, the 2020 response at P2 is interpreted as a local kinematic adjustment rather than synchronous acceleration of the entire slope. Because no overall failure occurred during the observation period, CSDI-defined Stage III is treated as enhanced deformation activity rather than a direct failure criterion. Continuous wavelet transform and time-lag cross-correlation indicate significant rainfall-related temporal responses, with deformation lagging rainfall by approximately 12, 108, and 36 days at P1, P2, and P3, respectively. Massflow simulation of a potential frontal failure scenario shows a rapid transition from source-area release to channelized high-speed runout and frontal deposition. The maximum simulated velocity reaches approximately 22.6 m/s in the main transport channel, while the frontal deposit exceeds 16 m in thickness and remains about 13.6 m at 200 s. The total simulated mass decreases by only about 0.38%, indicating good numerical mass conservation. These results demonstrate that the Li-Kan Highway landslide evolves through spatially heterogeneous and temporally asynchronous deformation, with rainfall responses varying among slope sectors. The integrated framework links long-term deformation monitoring, stage identification, rainfall-response analysis, and potential failure simulation, providing a practical basis for interpreting the evolution and hazard potential of large loess landslides.

Remote SensingVol. 18(22)
Chang'an University (CN)
National Natural Science Foundation of China, Education Department of Shaanxi Province
Landslides and related hazards
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon