Modeling Framework for Reinforced Concrete Buildings to Assess the Performance of Cast-in-Place Diaphragms with Openings

Assessing cast-in-place reinforced concrete slabs, or diaphragms, with openings requires a nonlinear model that captures the dynamic demands developed by the building and their transfer through the slab. This paper presents a three-dimensional modeling framework, that retains the two-way interaction between diaphragms and vertical structural elements as cracking and inelastic deformation develop. Layered shells with nonlinear concrete and reinforcement models represent slabs and walls, fiber elements represent beams and columns, and discrete springs account for joint deformation and reinforcement slip, so diaphragm force paths develop without predefined chords, collectors, or struts. Component parameters are calibrated against five cyclic subassembly tests, and building response is validated against shake-table tests of a full-scale, five-story reinforced-concrete building with diaphragm openings, under motions spanning serviceability to maximum-considered-earthquake levels. Design-level peak drifts are predicted within 6%, and simulated crack fields reproduce the principal regions of observed slab damage near columns and openings, supporting interpretation of the unmeasured membrane forces. During stronger motions, tensile demand spreads over larger slab areas, while compression remains concentrated near openings and vertical elements. Force distributions differ between floor-force and drift peaks and between loading directions, indicating that a single peak-response configuration cannot describe the evolving load path. Biaxial tension, tension–compression, and biaxial compression coexist under unidirectional shaking, whereas the equivalent-beam idealization assumes pure shear. The framework supports future studies of other building archetypes, opening configurations, and diaphragm design idealizations.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-20
DOI
https://doi.org/10.21203/rs.3.rs-11546051/v1
Primary Topic
Seismic Performance and Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Modeling Framework for Reinforced Concrete Buildings to Assess the Performance of Cast-in-Place Diaphragms with Openings

Travis Thonstad, Pratik Patra, Dawn E. Lehman
Research Square
Seismic Performance and Analysis
preprint

Modeling Framework for Reinforced Concrete Buildings to Assess the Performance of Cast-in-Place Diaphragms with Openings

Travis Thonstad, Pratik Patra, Dawn E. Lehman
preprint en

Abstract

Assessing cast-in-place reinforced concrete slabs, or diaphragms, with openings requires a nonlinear model that captures the dynamic demands developed by the building and their transfer through the slab. This paper presents a three-dimensional modeling framework, that retains the two-way interaction between diaphragms and vertical structural elements as cracking and inelastic deformation develop. Layered shells with nonlinear concrete and reinforcement models represent slabs and walls, fiber elements represent beams and columns, and discrete springs account for joint deformation and reinforcement slip, so diaphragm force paths develop without predefined chords, collectors, or struts. Component parameters are calibrated against five cyclic subassembly tests, and building response is validated against shake-table tests of a full-scale, five-story reinforced-concrete building with diaphragm openings, under motions spanning serviceability to maximum-considered-earthquake levels. Design-level peak drifts are predicted within 6%, and simulated crack fields reproduce the principal regions of observed slab damage near columns and openings, supporting interpretation of the unmeasured membrane forces. During stronger motions, tensile demand spreads over larger slab areas, while compression remains concentrated near openings and vertical elements. Force distributions differ between floor-force and drift peaks and between loading directions, indicating that a single peak-response configuration cannot describe the evolving load path. Biaxial tension, tension–compression, and biaxial compression coexist under unidirectional shaking, whereas the equivalent-beam idealization assumes pure shear. The framework supports future studies of other building archetypes, opening configurations, and diaphragm design idealizations.

Research Square
University of Washington (US)
Industry, innovation and infrastructure
Seismic Performance and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Modeling Framework for Reinforced Concrete Buildings to Assess the Performance of Cast-in-Place Diaphragms with Openings — Travis Thonstad, Pratik Patra, et al. · Research Square (2026) | TGRS Research Map | TGRS