Thermodynamic analysis of recompression Brayton power cycle for nuclear power plants

Widespread commercial deployment of innovative nuclear power plant designs is frequently constrained by the high specific capital cost of installed capacity. A promising solution involves transitioning from traditional steam-water loops to supercritical carbon dioxide (s-CO2) Brayton cycles. According to the literature, this approach enables a substantial reduction in the size and mass of turbomachinery and heat exchangers, thereby reducing overall capital expenditures. This study aims to select and thermodynamically optimize an s-CO2 cycle configuration to ensure maximum energy efficiency when integrated with the 10 MW High Temperature Gas-cooled Reactor (HTR-10) high-temperature gas-cooled reactor. Thermodynamic modeling was performed in Python using the CoolProp library. The Nelder-Mead simplex method was applied to determine optimal operating parameters—low pressure and recompression fraction—across turbine inlet pressures ranging from 12 to 35 MPa. Three CO2 cycle schemes were evaluated: simple, recuperative, and recompression. Results showed the simple Brayton cycle yields the lowest thermal efficiency (23.6%). Adding recuperation increases efficiency to 42.9%. The recompression scheme achieves the highest energy efficiency, reaching a maximum thermal efficiency of 50.6% at an initial pressure of 30 MPa, a cooler pressure of 7.8 MPa, and a recompression fraction of 0.67. A parametric zone of maximum efficiency was identified between 28 and 31 MPa. Ultimately, subject to the adopted assumptions, transitioning to a recompression s-CO2 cycle allows the thermal efficiency to be nearly doubled compared to the baseline HTR-10 plant design. Optimizing parameters near the critical CO2 region minimizes compression costs and enhances recuperation.

Authors

Institutions

Publication Details

Journal
Clean Energy Science and Technology
Published
2026-11-20
DOI
https://doi.org/10.18686/cest1073
Primary Topic
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Thermodynamic analysis of recompression Brayton power cycle for nuclear power plants

Aleksei S. Malenkov, Viacheslav A. Murashov, Andrey Rogalev, Daniil Patorkin et al.
Clean Energy Science and Technology
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
article

Thermodynamic analysis of recompression Brayton power cycle for nuclear power plants

Aleksei S. Malenkov, Viacheslav A. Murashov, Andrey Rogalev, Daniil Patorkin, Vladimir Korolev
article en

Abstract

Widespread commercial deployment of innovative nuclear power plant designs is frequently constrained by the high specific capital cost of installed capacity. A promising solution involves transitioning from traditional steam-water loops to supercritical carbon dioxide (s-CO2) Brayton cycles. According to the literature, this approach enables a substantial reduction in the size and mass of turbomachinery and heat exchangers, thereby reducing overall capital expenditures. This study aims to select and thermodynamically optimize an s-CO2 cycle configuration to ensure maximum energy efficiency when integrated with the 10 MW High Temperature Gas-cooled Reactor (HTR-10) high-temperature gas-cooled reactor. Thermodynamic modeling was performed in Python using the CoolProp library. The Nelder-Mead simplex method was applied to determine optimal operating parameters—low pressure and recompression fraction—across turbine inlet pressures ranging from 12 to 35 MPa. Three CO2 cycle schemes were evaluated: simple, recuperative, and recompression. Results showed the simple Brayton cycle yields the lowest thermal efficiency (23.6%). Adding recuperation increases efficiency to 42.9%. The recompression scheme achieves the highest energy efficiency, reaching a maximum thermal efficiency of 50.6% at an initial pressure of 30 MPa, a cooler pressure of 7.8 MPa, and a recompression fraction of 0.67. A parametric zone of maximum efficiency was identified between 28 and 31 MPa. Ultimately, subject to the adopted assumptions, transitioning to a recompression s-CO2 cycle allows the thermal efficiency to be nearly doubled compared to the baseline HTR-10 plant design. Optimizing parameters near the critical CO2 region minimizes compression costs and enhances recuperation.

Clean Energy Science and Technology
Moscow Power Engineering Institute (RU)
Affordable and clean energy, Climate action, Industry, innovation and infrastructure
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon