A car-following model based on two dimensional optimal velocity function(OVM-2D): Designed to improve ability to focus on multiple lateral moving targets for autonomous vehicles

Classical single-lane car-following models (e.g. the Optimal Velocity Model (OVM)) often exhibit limitations in representing the smooth and adaptive behavior required for cross-following scenarios involving dynamic target switching, such as adjacent vehicle cut-in, temporary lane intrusion, and lead vehicle cut-out. These limitations may increase potential safety risks during vehicle interactions. To enhance the continuity and adaptability of autonomous vehicle motion control, this paper proposes a multi-target attentive car-following model, termed OVM-2D, built upon the classical OVM. The proposed model introduces a Flexible Transition Function (FTF) to characterize the capability of attending to multiple targets during lateral interactions, enabling the ego vehicle to dynamically identify the most influential car-following target among multiple leading vehicles distributed across different lanes and achieve smooth, adaptive target switching in cross-following scenarios. This mechanism provides a simple, interpretable, and behaviorally consistent framework for modeling dynamic target switching. Linear stability analysis and phase-plane evolution under large perturbations suggest an expanded stability region under the considered conditions. Cross-validation using the CitySim and TOD_VT datasets demonstrates stable trajectory-fitting performance and satisfactory cross-dataset transferability under the evaluated scenarios. Comprehensive evaluations across four representative cross-following scenarios indicate that, compared with the selected baseline models, the proposed model achieves lower trajectory-prediction errors while producing smoother longitudinal responses during target transitions, thereby supporting the effectiveness of the proposed target-switching mechanism. Meanwhile, it exhibits advantages in reducing jerk, estimated fuel consumption, and emissions while mitigating acceleration fluctuations caused by minor longitudinal and lateral disturbances, providing an effective framework for dynamic target switching in complex multi-lane traffic.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Published
2026-11-20
DOI
https://doi.org/10.1177/09544070261504078
Primary Topic
Traffic control and management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A car-following model based on two dimensional optimal velocity function(OVM-2D): Designed to improve ability to focus on multiple lateral moving targets for autonomous vehicles

Heng Ding, Haijian Bai, Zhiyuan Xian, Xingyu Chen et al.
1 links
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Traffic control and management
article

A car-following model based on two dimensional optimal velocity function(OVM-2D): Designed to improve ability to focus on multiple lateral moving targets for autonomous vehicles

Heng Ding, Haijian Bai, Zhiyuan Xian, Xingyu Chen, Weihua Zhang, Ruijuan Dong
article en

Abstract

Classical single-lane car-following models (e.g. the Optimal Velocity Model (OVM)) often exhibit limitations in representing the smooth and adaptive behavior required for cross-following scenarios involving dynamic target switching, such as adjacent vehicle cut-in, temporary lane intrusion, and lead vehicle cut-out. These limitations may increase potential safety risks during vehicle interactions. To enhance the continuity and adaptability of autonomous vehicle motion control, this paper proposes a multi-target attentive car-following model, termed OVM-2D, built upon the classical OVM. The proposed model introduces a Flexible Transition Function (FTF) to characterize the capability of attending to multiple targets during lateral interactions, enabling the ego vehicle to dynamically identify the most influential car-following target among multiple leading vehicles distributed across different lanes and achieve smooth, adaptive target switching in cross-following scenarios. This mechanism provides a simple, interpretable, and behaviorally consistent framework for modeling dynamic target switching. Linear stability analysis and phase-plane evolution under large perturbations suggest an expanded stability region under the considered conditions. Cross-validation using the CitySim and TOD_VT datasets demonstrates stable trajectory-fitting performance and satisfactory cross-dataset transferability under the evaluated scenarios. Comprehensive evaluations across four representative cross-following scenarios indicate that, compared with the selected baseline models, the proposed model achieves lower trajectory-prediction errors while producing smoother longitudinal responses during target transitions, thereby supporting the effectiveness of the proposed target-switching mechanism. Meanwhile, it exhibits advantages in reducing jerk, estimated fuel consumption, and emissions while mitigating acceleration fluctuations caused by minor longitudinal and lateral disturbances, providing an effective framework for dynamic target switching in complex multi-lane traffic.

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Hefei University of Technology (CN)
Traffic control and management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon