An efficient high voltage gain DC–DC converter with reduced switch voltage stress
This paper introduces a high step-up DC–DC converter derived from a modified quasi-Y-source structure, aiming to achieve high voltage gain while maintaining low voltage stress on power switches. The proposed topology integrates a switched-capacitor cell with a reconfigured basic structure to improve the converter specifications. In this converter, diodes conduction losses are effectively mitigated, and zero-voltage switching (ZVS) at turn-on is achieved for all switches. In addition, all diodes turn off under zero-current conditions, which significantly reduces reverse recovery losses. The leakage inductance energy is properly managed and transferred to the load, while capacitive turn-on losses are inherently avoided which have improved the overall converter efficiency. The topology also features a continuous input current and a common ground between the input and output terminals, making it suitable for a wide range of power conversion applications. The proposed converter operating principles and steady-state characteristics are analyzed in detail. Experimental results obtained from a 200W laboratory prototype confirm the theoretical analysis.
Authors
- Maryam Hajilou (ORCID: https://orcid.org/0000-0002-3594-6600)
- Mohammad Gholami (ORCID: https://orcid.org/0000-0002-3174-0138)
- Ehsan Adib
- Hosein Farzanehfard
Institutions
- Shahrekord University (IR)
- Isfahan University of Technology (IR)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1038/s41598-026-80350-2
- Primary Topic
- Advanced DC-DC Converters
- Type
- article
- Field-Weighted Citation Impact
- 0.00