COMPASS: centre-of-mass preview and actuator-synchronised speed for an electrified mobile manipulator on rough terrain
Electrified crane manipulators can counterbalance construction carriers on rough terrain only if slow actuators reach balancing postures in time; stability-constrained planners usu- ally assume perfect tracking. COMPASS combines terrain-preview counterweight plan- ning, capacity-limited speed and route escalation, and execution that slows the vehicle when the manipulator lags, as established for hydraulic mobile manipulators. In simula- tions of a loaded 6.1 t skid-steer machine, an independent contact-wrench audit showed the acceleration-based reserve proxy deviating 8.8◦ RMS from a moment-inclusive diag- nostic. Relative to the transport pose, the counterweight raised the audited restoring moment in all eight crest seeds across contact, tyre and time-step settings, also at equal speed; speed-compatible execution prevented a crest failure. Under drive shortfalls, the coupling reduced the tracking error by up to 0.22 s and outperformed uniform slowing at equal driving time; with documented drive ratings it cost under 1 % driving time at 0.8 and 0.35 m s −1 .
Authors
- Mehdi Heydari Shahna (ORCID: https://orcid.org/0000-0002-1310-5392)
- Jouni Mattila (ORCID: https://orcid.org/0000-0003-1799-4323)
Institutions
- Tampere University (FI)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-20
- DOI
- https://doi.org/10.21203/rs.3.rs-11800831/v1
- Primary Topic
- Dynamics and Control of Mechanical Systems
- Type
- preprint