Stagnation-point mixed convection flow of a hybrid nanomaterial over a vertically-oriented stretching cylinder with thermal/solute diffusion and activation-energy aspects
In this research, a mixed convective hybrid nanomaterial flow over a vertical cylinder with a stagnation point and thermal/solutal diffusion aspects is computationally studied. A (50–50%) consistent layer of transformer/kerosene oils acts as a base fluid with the submersion of Cu and Al2O3 nanoparticles to form a hybrid nanomaterial. The objective of this research is to examine the effects of activation energy and thermal/solutal diffusion on the considered nanomaterial, taking into account different nanoparticle shapes. A system of PDEs consisting of the fundamental laws describing hybrid nanomaterial motion was used to transform the physical model into a mathematical form. The mathematical model is then non-dimensionalized using the similarity transformation. The obtained boundary-value problem was then solved numerically. The results indicate that increasing the stretching (α) and mixed-convection parameters (λ₁,λ₂) enhances the axial velocity whereas changes in temperature and concentration are comparatively modest for selected parameter variations. Increasing the thermal Biot number enhances the Nusselt number by approximately 45–65%, whereas increasing the solutal Biot number raises the Sherwood number by approximately 50–70%, indicating improved heat and mass transfer at the cylinder surface. Particle morphology also affects wall shear: platelet- and cylinder-shaped nanoparticles produce approximately 15–25% higher skin friction than spherical nanoparticles, while the reported variations for spherical particles remain within approximately 5–8% for the compared transport quantities. In addition, increasing the stretching parameter raises skin friction by approximately 40–60%, accompanied by moderate improvements of approximately 10–20% in heat- and mass-transfer rates.
Authors
- Muhammad Faisal (ORCID: https://orcid.org/0000-0002-0388-1996)
- Riffat Ahsan
- I. A. Badruddin
- A. S. A. Zedan
Institutions
- University of Azad Jammu and Kashmir (PK)
- King Khalid University (SA)
Publication Details
- Journal
- Energy Sources Part A Recovery Utilization and Environmental Effects
- Published
- 2026-11-20
- DOI
- https://doi.org/10.1080/15567036.2026.2765291
- Primary Topic
- Nanofluid Flow and Heat Transfer
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- King Khalid University