Hygroscopic versus liquid water absorption in thermally modified and Kiln-dried alder: Moisture gradients, swelling, and rheological strain

The non-uniform uptake of moisture in wood results in differential swelling and internal stresses, inducing defects such as deformation and cracking. The novelty of this study lies in comparing hygroscopic sorption and liquid water absorption at equivalent nominal MC and linking the resulting surface–core MC gradients to swelling and rheological strain components. This study systematically investigated the moisture content (MC) gradient, water increasing rate (WIR), dimensional swelling, and rheological properties of heat-treated (TM) and conventional kiln-dried (CKD) North American alder ( Alnus rubra Bong .) wood during hygroscopic and water absorption at 50 °C. The WIR during water absorption significantly exceeded that of hygroscopic absorption, declining rapidly with increasing MC. The initial WIR differential was 14.30% h⁻¹ for CKD and 11.74% h⁻¹ for TM wood, converging to approximately 0.6% h⁻¹ by test end. Within the target MC range, thermal modification effectively inhibited overall hygroscopic capacity, with surface and core MC during hygroscopic sorption exceeding that during water absorption. Heat treatment significantly suppressed tangential and radial swelling, with TM specimens consistently showing lower swelling ratios than CKD; for a given swelling ratio, MC during water absorption remained persistently higher than during hygroscopicity. Rheological analysis revealed that swelling strain difference increased with MC, and elastic strain difference was most pronounced in surface layers. Notably, viscoelastic creep and mechano-sorptive strains exhibited opposing trends in surface layers, whereas they shared the same direction but displayed contrasting magnitude variations in the core layer. These findings provide a scientific basis for optimizing the processing of thermally modified wood exposed to fluctuating moisture environments.

Authors

Institutions

Publication Details

Journal
Industrial Crops and Products
Published
2026-11-21
DOI
https://doi.org/10.1016/j.indcrop.2026.124814
Primary Topic
Wood Treatment and Properties
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hygroscopic versus liquid water absorption in thermally modified and Kiln-dried alder: Moisture gradients, swelling, and rheological strain

Na Huang, Jiajia Wang, Honghai Liu, Mingtao Lin
1 links
Industrial Crops and Products
Wood Treatment and Properties
article

Hygroscopic versus liquid water absorption in thermally modified and Kiln-dried alder: Moisture gradients, swelling, and rheological strain

Na Huang, Jiajia Wang, Honghai Liu, Mingtao Lin
article en

Abstract

The non-uniform uptake of moisture in wood results in differential swelling and internal stresses, inducing defects such as deformation and cracking. The novelty of this study lies in comparing hygroscopic sorption and liquid water absorption at equivalent nominal MC and linking the resulting surface–core MC gradients to swelling and rheological strain components. This study systematically investigated the moisture content (MC) gradient, water increasing rate (WIR), dimensional swelling, and rheological properties of heat-treated (TM) and conventional kiln-dried (CKD) North American alder ( Alnus rubra Bong .) wood during hygroscopic and water absorption at 50 °C. The WIR during water absorption significantly exceeded that of hygroscopic absorption, declining rapidly with increasing MC. The initial WIR differential was 14.30% h⁻¹ for CKD and 11.74% h⁻¹ for TM wood, converging to approximately 0.6% h⁻¹ by test end. Within the target MC range, thermal modification effectively inhibited overall hygroscopic capacity, with surface and core MC during hygroscopic sorption exceeding that during water absorption. Heat treatment significantly suppressed tangential and radial swelling, with TM specimens consistently showing lower swelling ratios than CKD; for a given swelling ratio, MC during water absorption remained persistently higher than during hygroscopicity. Rheological analysis revealed that swelling strain difference increased with MC, and elastic strain difference was most pronounced in surface layers. Notably, viscoelastic creep and mechano-sorptive strains exhibited opposing trends in surface layers, whereas they shared the same direction but displayed contrasting magnitude variations in the core layer. These findings provide a scientific basis for optimizing the processing of thermally modified wood exposed to fluctuating moisture environments.

Industrial Crops and ProductsVol. 254
Nanjing Forestry University (CN), Institute of Chemical Industry of Forest Products (CN), State Forestry and Grassland Administration (CN)
National Natural Science Foundation of China
Wood Treatment and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon