Test procedure for thin sheet steel resistance to sulfide stress corrosion cracking
Currently, Flexible Composite Pipe (FCP) are increasingly being used to transport oil and gas condensate mixed fluids, in which steel tape acts as the central element providing strength. One of the most important characteristics of a pipeline material’s ability to ensure safe operation is its resistance to sulfide stress cracking (SSC). Existing standards are not designed for testing thin sheets. In this regard, this work is devoted to the development of a method for testing steel thin sheets, from which reinforcing tape is manufactured, for resistance to sulfide stress cracking. Using finite element modeling (FEM) of the stress-strain state, an optimal geometry for test specimens was developed, which allows the required stress level to be achieved in the gauge section of the specimens. A series of parallel tests was conducted on two types of specimens prepared from steel products made of 13KhFA, 30KhMA, and 20Kh3MVA-Sh steels: massive specimens according to NACE TM0177 method A and thin specimens according to the developed method, which showed high convergence of results. The developed method allows assessing the resistance of steel thin sheets to sulfide stress cracking, with the reliability of the results being comparable to that of standard international testing methods.
Authors
- D. L. Merson
- K. I. Koshcheev
Institutions
- Togliatti State University (RU)
Publication Details
- Journal
- Industrial laboratory Diagnostics of materials
- Published
- 2026-11-20
- DOI
- https://doi.org/10.26896/1028-6861-2026-92-11-66-74
- Primary Topic
- Hydrogen embrittlement and corrosion behaviors in metals
- Type
- article
- Field-Weighted Citation Impact
- 0.00