Evaluation of plasticity and damage evolution of welded S355 steel and its heat-affected zone

Welded joints are critical regions in steel structures where complex microstructures can reduce local ductility and fracture resistance. Stress triaxiality assessment is essential in welded joint analysis, as it enables the identification of highly constrained regions, such as the weld toe and heat-affected zone (HAZ), where crack initiation and propagation are more likely. These regions exhibit reduced ductility and an increased susceptibility to brittle failure, particularly in the presence of mechanisms such as hydrogen-induced cracking in offshore structures and pipelines. This study investigates the influence of stress triaxiality and microstructural heterogeneity on the plasticity and fracture behavior of S355 structural steel, its heat-affected zone (HAZ), and a representative weld metal. To investigate the material ductility and damage criteria for welded regions with potential difference in fracture strain, triaxiality stress-state, different notched specimens were tested to introduce controlled variations in triaxiality under different loading conditions. Local strain evolution and fracture strain were measured using Digital Image Correlation (DIC), while Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were employed to analyses fracture surfaces and identify microstructural and compositional features. The results reveal pronounced differences in fracture strain and triaxiality sensitivity between the base metal, HAZ, and weld metal. The HAZ exhibited the lowest ductility and the highest susceptibility to shear and mixed-mode loading, whereas the parent S355 steel retained higher strain and mixed-mode capacity. SEM observations confirmed that void nucleation and coalescence are highly different over welded regions, with less ductile fracture mechanics in the HAZ. The experimentally derived plasticity and fracture strain–triaxiality relationships were used to calibrate Bai–Wierzbicki (B–W) fracture loci, assessing strain capacity in welded structures. The findings are directly relevant to the plastic deformation regime and to structural scenarios involving low-cycle fatigue, accidental overload, and impact or collision events, where large strains and multiaxial cyclic stress states develop in welded zones. By quantifying the interplay between triaxiality, ductility, anisotropy, and microstructure, this work contributes to improved strain-based design and fracture assessment methods for critical welded steel structures.

Authors

Institutions

Publication Details

Journal
The International Journal of Advanced Manufacturing Technology
Published
2026-11-21
DOI
https://doi.org/10.1007/s00170-026-19534-z
Primary Topic
Metal Forming Simulation Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Evaluation of plasticity and damage evolution of welded S355 steel and its heat-affected zone

Even Englund, R. M. Chandima Ratnayake
The International Journal of Advanced Manufacturing Technology
Metal Forming Simulation Techniques
article

Evaluation of plasticity and damage evolution of welded S355 steel and its heat-affected zone

Even Englund, R. M. Chandima Ratnayake
article en

Abstract

Welded joints are critical regions in steel structures where complex microstructures can reduce local ductility and fracture resistance. Stress triaxiality assessment is essential in welded joint analysis, as it enables the identification of highly constrained regions, such as the weld toe and heat-affected zone (HAZ), where crack initiation and propagation are more likely. These regions exhibit reduced ductility and an increased susceptibility to brittle failure, particularly in the presence of mechanisms such as hydrogen-induced cracking in offshore structures and pipelines. This study investigates the influence of stress triaxiality and microstructural heterogeneity on the plasticity and fracture behavior of S355 structural steel, its heat-affected zone (HAZ), and a representative weld metal. To investigate the material ductility and damage criteria for welded regions with potential difference in fracture strain, triaxiality stress-state, different notched specimens were tested to introduce controlled variations in triaxiality under different loading conditions. Local strain evolution and fracture strain were measured using Digital Image Correlation (DIC), while Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were employed to analyses fracture surfaces and identify microstructural and compositional features. The results reveal pronounced differences in fracture strain and triaxiality sensitivity between the base metal, HAZ, and weld metal. The HAZ exhibited the lowest ductility and the highest susceptibility to shear and mixed-mode loading, whereas the parent S355 steel retained higher strain and mixed-mode capacity. SEM observations confirmed that void nucleation and coalescence are highly different over welded regions, with less ductile fracture mechanics in the HAZ. The experimentally derived plasticity and fracture strain–triaxiality relationships were used to calibrate Bai–Wierzbicki (B–W) fracture loci, assessing strain capacity in welded structures. The findings are directly relevant to the plastic deformation regime and to structural scenarios involving low-cycle fatigue, accidental overload, and impact or collision events, where large strains and multiaxial cyclic stress states develop in welded zones. By quantifying the interplay between triaxiality, ductility, anisotropy, and microstructure, this work contributes to improved strain-based design and fracture assessment methods for critical welded steel structures.

The International Journal of Advanced Manufacturing Technology
University of Stavanger (NO)
Universitetet i Stavanger
Metal Forming Simulation Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon