Counterion Selection Governs Poly(acrylic acid) Binder Performance in Silicon-Graphite Composite Anodes

Silicon-based anodes offer a promising pathway to increase the energy density of lithium-ion batteries, but their implementation remains limited by mechanical degradation and unstable solid electrolyte interphase (SEI) formation. Poly(acrylic acid) (PAA) is one of the most widely investigated binders for Si-based electrodes, and partial neutralization of its carboxylic acid functions with inorganic bases is commonly employed to improve binder processability. This is accompanied by the introduction of metallic cations, which can be leveraged to promote ionic cross-linking between polymer chains. While such interactions have been demonstrated to enhance the mechanical properties and electrochemical performance of other carboxylate-containing binders, their impact in PAA-based systems remains unclear. Here, the influence of monovalent (Li+, Na+) and divalent (Ca2+, Mg2+, Zn2+) cations introduced during PAA neutralization on the processing, mechanical, electrochemical, and interfacial properties of Si-rich electrodes is investigated. Although divalent cations are shown to promote ionic bridging between polymer chains, this induces aggregation of the PAA, which negatively impacts slurry rheology as well as electrode mechanical properties and electrical resistivity, offsetting any potential benefits associated with enhanced cross-linking. In contrast, monovalent cations provide an improved balance between slurry stability, electrode properties, and cycling performance. Postmortem solid-state magic-angle-spinning nuclear magnetic resonance reveals that the substituting cation also influences SEI composition, with Na+ promoting a LiF-rich interphase. The PAAH0.8Na0.2 formulation delivers the best overall performance, maintaining an areal capacity of 4.5 mAh cm–2 after 50 cycles. These results demonstrate that increasing binder cross-linking is not universally beneficial for Si-rich electrodes and highlight the importance of counterions on slurry stability and chemistry.

Authors

Institutions

Publication Details

Journal
ACS Applied Polymer Materials
Published
2026-11-21
DOI
https://doi.org/10.1021/acsapm.6c03482
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Counterion Selection Governs Poly(acrylic acid) Binder Performance in Silicon-Graphite Composite Anodes

Thomas Devic, Natalie Herkendaal, Bernard Lestriez, Lionel Roué et al.
2 links
ACS Applied Polymer Materials
Advancements in Battery Materials
article

Counterion Selection Governs Poly(acrylic acid) Binder Performance in Silicon-Graphite Composite Anodes

Thomas Devic, Natalie Herkendaal, Bernard Lestriez, Lionel Roué, Nicolas Dupré, Jean-Marc Suau
article en

Abstract

Silicon-based anodes offer a promising pathway to increase the energy density of lithium-ion batteries, but their implementation remains limited by mechanical degradation and unstable solid electrolyte interphase (SEI) formation. Poly(acrylic acid) (PAA) is one of the most widely investigated binders for Si-based electrodes, and partial neutralization of its carboxylic acid functions with inorganic bases is commonly employed to improve binder processability. This is accompanied by the introduction of metallic cations, which can be leveraged to promote ionic cross-linking between polymer chains. While such interactions have been demonstrated to enhance the mechanical properties and electrochemical performance of other carboxylate-containing binders, their impact in PAA-based systems remains unclear. Here, the influence of monovalent (Li+, Na+) and divalent (Ca2+, Mg2+, Zn2+) cations introduced during PAA neutralization on the processing, mechanical, electrochemical, and interfacial properties of Si-rich electrodes is investigated. Although divalent cations are shown to promote ionic bridging between polymer chains, this induces aggregation of the PAA, which negatively impacts slurry rheology as well as electrode mechanical properties and electrical resistivity, offsetting any potential benefits associated with enhanced cross-linking. In contrast, monovalent cations provide an improved balance between slurry stability, electrode properties, and cycling performance. Postmortem solid-state magic-angle-spinning nuclear magnetic resonance reveals that the substituting cation also influences SEI composition, with Na+ promoting a LiF-rich interphase. The PAAH0.8Na0.2 formulation delivers the best overall performance, maintaining an areal capacity of 4.5 mAh cm–2 after 50 cycles. These results demonstrate that increasing binder cross-linking is not universally beneficial for Si-rich electrodes and highlight the importance of counterions on slurry stability and chemistry.

ACS Applied Polymer Materials
Centre National de la Recherche Scientifique (FR), Arkema (France) (FR), Institut National de la Recherche Scientifique (CA), Nantes Université (FR)
Natural Sciences and Engineering Research Council of Canada, Fonds de recherche du Québec – Nature et technologies
Affordable and clean energy
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon