Gravitational Mass of Trapped Charge Carriers in Non-Volatile Flash Memory
Digital information stored in a non-volatile solid-state memory array possesses a non-zero gravitational weight. However, for a macroscopically neutral memory die with isolated, stoichiometrically fixed boundaries, charge neutrality dictates that the total on-die electron count remains invariant (ΔN_e(die) = 0). Every electron injected into a floating gate or charge-trap layer is precisely balanced by an equal electron deficit (image charge) on the surrounding control gate, wordline, or channel electrodes. Counting trapped carrier rest mass alone (Δm_rest ≈ 1.82 × 10⁻¹⁵ kg to 7.29 × 10⁻¹⁴ kg across a 1 TB 3D NAND array) represents an open-subsystem bookkeeping metric rather than a physical net mass gain of the closed die. Instead, the true net gravitational mass difference of written data on a neutral die arises from stored free energy—predominantly capacitive electrostatic potential energy (Δm_E = ΔU/c² ≈ 1.19 × 10⁻¹⁹ kg for 1 TB TLC at 10⁴ e⁻/cell and V_eff = 5 V) and trap-binding enthalpy (~7 × 10⁻²⁰ kg at ~1.5 eV per electron), totaling ~2 × 10⁻¹⁹ kg per TB. This stored energy term is roughly 2 × 10⁵ times smaller than the naive carrier rest-mass estimate, with relativistic energy-to-mass ratios contributing only ~10⁻⁶ to ~10⁻⁵ of the electron rest mass. If an autonomous device dissipates write energy from an internal battery, the system experiences a net mass loss dictated by the total dissipated radiation and heat. To isolate this gravitational observable from macroscopic confounders, the theoretical model enforces four boundary conditions: Gravitational and Vacuum Reference Frame: The memory die rests inside an evacuated chamber at sea level under the exact SI standard acceleration of gravity, g_n = 9.80665 m s⁻² (Mohr et al., 2025). Evacuating the chamber eliminates convective drafts, barometric air buoyancy, surface water physisorption, and airborne particulates. Idealized Flash Cell Array: The test specimen comprises an array of floating-gate (FG) or charge-trap flash (CTF) transistors in a vertical 3D gate-all-around (GAA) geometry, where each cell confines electrons inside an electrically isolated polysilicon gate or silicon-nitride (Si₃N₄) trap layer bounded by silicon-dioxide (SiO₂) tunnel and blocking oxides (Luo et al., 2018; Wilhelmer et al., 2026). Invariant Hardware and Thermodynamic State: All wordlines, bitlines, polysilicon channels, interconnects, and lattice phonon populations remain at constant temperature, mechanical strain, and stoichiometry between the erased and programmed measurements, excluding thermal expansion, outgassing, or oxidation. Locally Screened Charge-State Boundary Condition: In the erased reference state (logical 1 across all bits), the charge-trap layer holds zero excess electrons relative to the neutral channel (ΔN_e = 0) (Luo et al., 2018). In the saturated written state (logical 0 across all bits), Fowler–Nordheim tunneling injects an average of n_e excess electrons per cell into the trapping material (Luo et al., 2018). Crucially, local capacitive image charges on surrounding control gates and channels screen the electric field, preserving net macroscopic charge neutrality (ΔN_e(die) = 0) and preventing multi-megavolt monopole charging of the die.
Authors
- Arttu Pitou At (ORCID: https://orcid.org/0009-0001-2974-4412)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-21
- DOI
- https://doi.org/10.5281/zenodo.24406897
- Primary Topic
- Semiconductor materials and devices
- Type
- article
- Field-Weighted Citation Impact
- 0.00