Three-Dimensional Printable Human Platelet Lysate Methacrylate/Hyaluronic Acid Methacrylate/Nanohydroxyapatite Nanocomposite Hydrogels with Enhanced Mechanical and Rheological Properties for Tissue Engineering

Human platelet lysate-based hydrogels have gained increasing attention as a xeno-free platform for tissue engineering due to their potential to support cell viability and biological activity. Human-derived platelet lysate methacrylate (hPLMA) is a recently developed photocrosslinkable material that enables the formation of three-dimensional (3D) hydrogels through light-induced crosslinking of blood-derived proteins. However, evaluating hPLMA in different hydrogel formulations may provide further insight into its potential for advanced applications. In this study, hyaluronic acid methacrylate (HAMA, 1% w/v) and nanohydroxyapatite (nHAp, 5% w/v) were incorporated into hPLMA to develop a photocrosslinkable nanocomposite hydrogel (hPLMA/HAMA/nHAp). The incorporation of HAMA increased the compressive strength from 2.1 ± 0.9 kPa to 4.5 ± 1.5 kPa, resulting in an approximately 40-fold increase in the storage modulus while preserving shear-thinning behavior. The composite hydrogels exhibited sustained release of platelet-derived growth factor-AB (PDGF-AB) and vascular endothelial growth factor (VEGF) over 9 days and supported human adipose stem cell (hASC) viability (>93% for all formulations). Furthermore, extrusion-based 3D printing enabled the fabrication of grid-shaped constructs with maintained porosity, demonstrating moderate printability and shape fidelity of the constructs. While the independent contribution of nHAp remains to be investigated in future studies, the results demonstrate that the incorporation of HAMA improves the mechanical and rheological properties of the hPLMA/nHAp hydrogel, highlighting its potential for future tissue engineering applications.

Authors

Institutions

Publication Details

Journal
ACS Biomaterials Science & Engineering
Published
2026-11-18
DOI
https://doi.org/10.1021/acsbiomaterials.6c00780
Primary Topic
Hydrogels: synthesis, properties, applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Three-Dimensional Printable Human Platelet Lysate Methacrylate/Hyaluronic Acid Methacrylate/Nanohydroxyapatite Nanocomposite Hydrogels with Enhanced Mechanical and Rheological Properties for Tissue Engineering

Şükran Şeker, Yaşar Murat Elçin, João Filipe Mano, Bruno Ladeira et al.
ACS Biomaterials Science & Engineering
Hydrogels: synthesis, properties, applications
article

Three-Dimensional Printable Human Platelet Lysate Methacrylate/Hyaluronic Acid Methacrylate/Nanohydroxyapatite Nanocomposite Hydrogels with Enhanced Mechanical and Rheological Properties for Tissue Engineering

Şükran Şeker, Yaşar Murat Elçin, João Filipe Mano, Bruno Ladeira, Tiago R. Correia, Franck Cleymand
article en

Abstract

Human platelet lysate-based hydrogels have gained increasing attention as a xeno-free platform for tissue engineering due to their potential to support cell viability and biological activity. Human-derived platelet lysate methacrylate (hPLMA) is a recently developed photocrosslinkable material that enables the formation of three-dimensional (3D) hydrogels through light-induced crosslinking of blood-derived proteins. However, evaluating hPLMA in different hydrogel formulations may provide further insight into its potential for advanced applications. In this study, hyaluronic acid methacrylate (HAMA, 1% w/v) and nanohydroxyapatite (nHAp, 5% w/v) were incorporated into hPLMA to develop a photocrosslinkable nanocomposite hydrogel (hPLMA/HAMA/nHAp). The incorporation of HAMA increased the compressive strength from 2.1 ± 0.9 kPa to 4.5 ± 1.5 kPa, resulting in an approximately 40-fold increase in the storage modulus while preserving shear-thinning behavior. The composite hydrogels exhibited sustained release of platelet-derived growth factor-AB (PDGF-AB) and vascular endothelial growth factor (VEGF) over 9 days and supported human adipose stem cell (hASC) viability (>93% for all formulations). Furthermore, extrusion-based 3D printing enabled the fabrication of grid-shaped constructs with maintained porosity, demonstrating moderate printability and shape fidelity of the constructs. While the independent contribution of nHAp remains to be investigated in future studies, the results demonstrate that the incorporation of HAMA improves the mechanical and rheological properties of the hPLMA/nHAp hydrogel, highlighting its potential for future tissue engineering applications.

ACS Biomaterials Science & Engineering
Ankara University (TR), University of Aveiro (PT), Université de Lorraine (FR)
Hydrogels: synthesis, properties, applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon