Quasi-Static and High-Speed Compression of AlSi10Mg Menger Fractal Structures: An Interval-Dependent Experimental Assessment
Laser powder bed fusion was used to fabricate first-, second-, and third-order (M1–M3) AlSi10Mg Menger structures. Sixty force–machine-displacement histories were obtained under quasi-static compression and nominal servo-hydraulic speeds of 5.4, 8.1, and 10 m/s, supported by quasi-static digital image correlation and high-speed images. Specific external work was evaluated over a common initial engineering strain of 4.66% (baseline A) and separately over order-specific minimum recorded high-speed strokes of 1.27, 5.69, and 17.74 mm (baseline B). Under baseline B, quasi-static specific work was 2.04, 11.80, and 39.16 J/g for M1–M3, respectively; these values reflect non-equivalent observation intervals. At the common strain, quasi-static work was 2.04, 1.63, and 1.02 J/g, versus 1.10, 1.77, and 1.19 J/g at 10 m/s. These are early-stage, machine-displacement-based comparisons, not measurements of complete crushing capacity. The short M1 high-speed interval and non-equivalent contact-zero procedures preclude interpreting its recorded work decrement as a validated material-rate effect. Corrected TOPSIS coefficients also depend on the evaluation interval and selected attributes, including a cross-regime consistency attribute with unresolved M1 uncertainty. The contribution is an experimentally bounded comparison of the tested as-built structures, rather than an unconditional order ranking or validated protection-design recommendation.
Authors
- Guili Yang (ORCID: https://orcid.org/0009-0009-5355-1723)
- Xie Xingbo (ORCID: https://orcid.org/0009-0009-9163-9347)
- Huayuan Ma (ORCID: https://orcid.org/0000-0002-0743-8967)
- 王荣泽
- Xinghua LI
- Zhongying Dong
Institutions
- PLA Army Engineering University (CN)
Publication Details
- Journal
- Materials
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/ma19224909
- Primary Topic
- Cellular and Composite Structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00