ARBOK ALIGRA: an aluminum-ion battery with a TEGA cathode and electrolyte
Aluminum is cheap, the most abundant metal in the Earth's crust, and each of its ions carries 3 charges against 1 for lithium; its volumetric capacity is about 8,000 mAh/cm3, almost 4 times that of lithium. A laboratory aluminum-ion prototype has charged in 1 minute and run 7,500 cycles, but stored only about 40 Wh/kg against 250-300 Wh/kg for lithium-ion. The chloroaluminate ionic-liquid electrolyte is expensive, corrosive and hygroscopic, the graphite cathode swells as large ions intercalate, and the aluminum anode is covered by an oxide film. We describe ARBOK ALIGRA, in which the cathode and the electrolyte are made of thermally expanded graphite ARBOK (TEGA), a graphene material of 3-5 bln layers with a specific surface of 2,400 m2/g and thermal conductivity higher than copper, already expanded so that ions do not need to push the layers apart. The principle of TEGA instead of liquid electrolyte targets +10% efficiency. A scenario estimate for grid storage gives about 3 bln USD a year worldwide and 1.3 bln USD for the US for every 10% saved. TRL is not assigned.
Authors
- D. B. Ponomarenko (ORCID: https://orcid.org/0009-0008-5806-7159)
- Michael Vischmidt (ORCID: https://orcid.org/0009-0001-0722-2007)
- Alexander Nikulin
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-19
- DOI
- https://doi.org/10.5281/zenodo.24377251
- Primary Topic
- Aqueous and Flow Batteries
- Type
- preprint