Implementation and Comparative Evaluation of Embedded Machine Learning Algorithms for Thermal Control in an IoT-Enabled Cyber-Physical Convective Drying System: Impact on Effective Moisture Diffusivity and Specific Thermal Energy Input
Thermal regulation in convective drying processes constitutes a complex nonlinear system characterized by the dynamic interaction of heat and mass transfer phenomena that govern drying kinetics and energy efficiency. This study develops and implements embedded machine learning algorithms for thermal control in an Internet of Things (IoT)-enabled edge computing cyber-physical convective drying system for jicama (Pachyrhizus erosus), deployed on an ESP32-S3 microcontroller. Three control strategies were compared: a decision tree classifier, a feedforward artificial neural network (ANN), and a conventional proportional–integral–derivative (PID) controller. The models were trained using a multivariable state vector integrating thermal and psychrometric process variables. Experimental validation with a 5 kg fresh jicama load showed that the embedded learning controllers achieved shorter drying times than the conventional PID controller under the investigated conditions. The ANN achieved the shortest drying time (8.08 h), highest thermal efficiency (80%), lowest specific thermal energy supplied by the drying air (3112 kJ/kg), and highest effective moisture diffusivity (2.0 × 10−10 m2/s). The decision tree exhibited competitive energy performance (3454 kJ/kg), demonstrating its applicability as an alternative embedded strategy for thermal regulation. In contrast, the PID controller resulted in the longest drying time (14.50 h). These findings demonstrate the feasibility of embedded machine learning to enhance thermal stability and energy efficiency in cyber-physical convective drying systems.
Authors
- Micael Gerardo Bravo-Sánchez (ORCID: https://orcid.org/0000-0003-3083-4172)
- Adriana Guzmán-López (ORCID: https://orcid.org/0009-0002-8862-2957)
- Juan Pablo Aguilera Álvarez (ORCID: https://orcid.org/0000-0001-7255-6313)
- Francisco Villaseñor‐Ortega (ORCID: https://orcid.org/0000-0002-7190-0511)
- Salvador M. Aceves (ORCID: https://orcid.org/0000-0002-8189-0572)
- Juan Manuel Tabares-Martinez (ORCID: https://orcid.org/0009-0000-2437-4451)
Institutions
- Tecnológico Nacional de México (MX)
- Technological Institute of Celaya (MX)
Publication Details
- Journal
- Machine Learning and Knowledge Extraction
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/make8110388
- Primary Topic
- Food Drying and Modeling
- Type
- article
- Field-Weighted Citation Impact
- 0.00