Microencapsulation of Flaxseed Oil Using Chitosan–Gum Arabic Biopolymers: Formulation, Characterization, Stability, and Release Behavior Under Simulated Gastric and Intestinal Conditions

This study investigated the incorporation of flaxseed oil into chitosan (CS)–gum arabic (GA) particulate matrices stabilized with sodium tripolyphosphate (TPP). Three formulations were compared at 1.5% (w/v) CS while varying GA (4 and 8%, w/v) and the TPP crosslinking-solution concentration (0.75 and 6%, w/v). The preparation combined oil-in-water emulsification, CS–GA association, and subsequent TPP-mediated ionic stabilization. Recovered freeze-dried fractions were examined using SEM, FTIR, TGA/DTG, DSC, XRD, GC–MS, and HPLC. Formulation S1 (1.5% CS, 4% GA, 6% TPP crosslinking solution) had the highest reported encapsulation efficiency (EE, 85%) and loading efficiency (LE, 60%) among the three tested formulations; statistical differences cannot be established without replicate dispersion estimates. Spectral and diffraction results were consistent with changes in polymer interactions and the organization of predominantly poorly ordered materials but did not establish a unique core–shell structure. Thermal analysis revealed formulation-dependent dehydration and decomposition behavior. HPLC chromatograms recorded after 5, 30, 60, and 120 min indicated time-dependent differences under separate simulated gastric and intestinal conditions; in the absence of calibrated quantitative peak areas, these responses cannot be expressed as cumulative release percentages. Oxidative stability during storage was not tested. The work therefore provides a comparative formulation–structure–behavior assessment, while identifying the additional measurements needed to establish quantitative oral-release performance.

Authors

Institutions

Publication Details

Journal
Polymers
Published
2026-11-19
DOI
https://doi.org/10.3390/polym18222910
Primary Topic
Microencapsulation and Drying Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microencapsulation of Flaxseed Oil Using Chitosan–Gum Arabic Biopolymers: Formulation, Characterization, Stability, and Release Behavior Under Simulated Gastric and Intestinal Conditions

Omar Larbi Bouamrane, Raluca Şomoghi, Leonard Ionuț Atanase, Fathia Rahmani et al.
Polymers
Microencapsulation and Drying Processes
article

Microencapsulation of Flaxseed Oil Using Chitosan–Gum Arabic Biopolymers: Formulation, Characterization, Stability, and Release Behavior Under Simulated Gastric and Intestinal Conditions

Omar Larbi Bouamrane, Raluca Şomoghi, Leonard Ionuț Atanase, Fathia Rahmani, Gisela Trifas, Aouamer Djamila, Abou Mustapha Mohamed, Gherrak Fouzia, Ezzeroug Kawthar, Louadj Amel
article en

Abstract

This study investigated the incorporation of flaxseed oil into chitosan (CS)–gum arabic (GA) particulate matrices stabilized with sodium tripolyphosphate (TPP). Three formulations were compared at 1.5% (w/v) CS while varying GA (4 and 8%, w/v) and the TPP crosslinking-solution concentration (0.75 and 6%, w/v). The preparation combined oil-in-water emulsification, CS–GA association, and subsequent TPP-mediated ionic stabilization. Recovered freeze-dried fractions were examined using SEM, FTIR, TGA/DTG, DSC, XRD, GC–MS, and HPLC. Formulation S1 (1.5% CS, 4% GA, 6% TPP crosslinking solution) had the highest reported encapsulation efficiency (EE, 85%) and loading efficiency (LE, 60%) among the three tested formulations; statistical differences cannot be established without replicate dispersion estimates. Spectral and diffraction results were consistent with changes in polymer interactions and the organization of predominantly poorly ordered materials but did not establish a unique core–shell structure. Thermal analysis revealed formulation-dependent dehydration and decomposition behavior. HPLC chromatograms recorded after 5, 30, 60, and 120 min indicated time-dependent differences under separate simulated gastric and intestinal conditions; in the absence of calibrated quantitative peak areas, these responses cannot be expressed as cumulative release percentages. Oxidative stability during storage was not tested. The work therefore provides a comparative formulation–structure–behavior assessment, while identifying the additional measurements needed to establish quantitative oral-release performance.

PolymersVol. 18(22)
Apollonia University (RO), Academia Oamenilor de Știință din România (RO), Petroleum & Gas University of Ploieşti (RO), Gheorghe Asachi Technical University of Iași (RO), Institutul Naţional de Cercetare Dezvoltare pentru Chimie si Petrochimie (RO), Université Djilali Bounaama Khemis Miliana (DZ), Centre Universitaire Morsli Abdellah de Tipaza (DZ), Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques (DZ)
Microencapsulation and Drying Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon