Effect of cooling conditions on microstructure evolution and tensile deformation behavior of friction stir welded NiCoCr medium-entropy alloy

The influence of cooling conditions on the microstructure and transverse tensile behavior of friction stir welded NiCoCr medium-entropy alloy was investigated by comparing air-cooled friction stir welding (AFSW) with alcohol–dry ice-assisted friction stir welding (LFSW) under identical nominal welding parameters. Both conditions produced sound joints containing fine, predominantly equiaxed grains in the nugget zone (NZ). Compared with AFSW, LFSW reduced the average grain size from 4.85 to 3.75 µm in the upper NZ and from 4.77 to 3.93 µm in the lower NZ. The finer-grained LFSW joint exhibited a higher yield strength (546 ± 3 MPa) than AFSW (471 ± 3 MPa), while their ultimate tensile strengths remained comparable (828 ± 7 and 836 ± 4 MPa, respectively). In contrast, uniform elongation decreased from 62.9 ± 5% for AFSW to 25.0 ± 2% for LFSW. Electron backscatter diffraction revealed progressive grain subdivision and recrystallization across the base material–thermo-mechanically affected zone–NZ transition in both joints. Digital image correlation further showed that plastic strain was preferentially accommodated outside the refined NZ, with more pronounced spatial strain partitioning in the LFSW joint. These results demonstrate that intensified external cooling promotes NZ grain refinement and increases joint yield strength, but its benefit is offset by reduced deformation compatibility during transverse tension. The comparison establishes the importance of balancing local NZ strengthening with strain accommodation across the entire welded joint.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-19
DOI
https://doi.org/10.21203/rs.3.rs-11608750/v1
Primary Topic
Advanced Welding Techniques Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Effect of cooling conditions on microstructure evolution and tensile deformation behavior of friction stir welded NiCoCr medium-entropy alloy

Yifu Shen, Tzu Hsiu Chou, Jinpeng Hu, Guoqiang Huang et al.
Research Square
Advanced Welding Techniques Analysis
preprint

Effect of cooling conditions on microstructure evolution and tensile deformation behavior of friction stir welded NiCoCr medium-entropy alloy

Yifu Shen, Tzu Hsiu Chou, Jinpeng Hu, Guoqiang Huang, Borui Zhang, Zhikang Shen
preprint en

Abstract

The influence of cooling conditions on the microstructure and transverse tensile behavior of friction stir welded NiCoCr medium-entropy alloy was investigated by comparing air-cooled friction stir welding (AFSW) with alcohol–dry ice-assisted friction stir welding (LFSW) under identical nominal welding parameters. Both conditions produced sound joints containing fine, predominantly equiaxed grains in the nugget zone (NZ). Compared with AFSW, LFSW reduced the average grain size from 4.85 to 3.75 µm in the upper NZ and from 4.77 to 3.93 µm in the lower NZ. The finer-grained LFSW joint exhibited a higher yield strength (546 ± 3 MPa) than AFSW (471 ± 3 MPa), while their ultimate tensile strengths remained comparable (828 ± 7 and 836 ± 4 MPa, respectively). In contrast, uniform elongation decreased from 62.9 ± 5% for AFSW to 25.0 ± 2% for LFSW. Electron backscatter diffraction revealed progressive grain subdivision and recrystallization across the base material–thermo-mechanically affected zone–NZ transition in both joints. Digital image correlation further showed that plastic strain was preferentially accommodated outside the refined NZ, with more pronounced spatial strain partitioning in the LFSW joint. These results demonstrate that intensified external cooling promotes NZ grain refinement and increases joint yield strength, but its benefit is offset by reduced deformation compatibility during transverse tension. The comparison establishes the importance of balancing local NZ strengthening with strain accommodation across the entire welded joint.

Research Square
Southwest University of Science and Technology (CN), Southwest University (CN), City University of Hong Kong (HK), Nanjing University of Aeronautics and Astronautics (CN)
Advanced Welding Techniques Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon