Preparation and Evaluation of a Delayed Crosslinking Gel System for Deep Water Shutoff in Marine Unconsolidated Sandstone Reservoirs

Water channeling in offshore unconsolidated sandstone reservoirs motivates the development of injectable gels for water shutoff. A polymer prepared from acrylamide, N-vinylpyrrolidone, and cetyl methacrylate (designated ANC16) was combined with polyethyleneimine (PEI) and evaluated by FTIR, 1H NMR, dry-sample thermogravimetry, Sydansk bottle tests, and sand-pack flooding. FTIR and 1H NMR support the proposed functional groups and structural motifs of the precursor polymer. The formulation selected from the tested concentration series contained 0.5 wt% ANC16 and 0.25 wt% PEI. At 35,000 mg/L total salinity, the time to reach Sydansk grade D decreased from 64 to 22 h as temperature increased from 30 to 110 °C. Grade-H gels were observed at salinities of 0–30,000 mg/L at 90 °C. In the sand-pack experiment at 90 °C and 35,000 mg/L, the maximum precursor injection pressure was 0.185 MPa, and subsequent treatment reduced water-phase permeability by 97.85%. During flooding at 1 mL/min, injection pressure remained near 2.2 MPa from approximately four to 20 pore volumes. These results demonstrate delayed gel development, laboratory injectivity, and sustained flow restriction over the tested interval.

Authors

Institutions

Publication Details

Journal
Gels
Published
2026-11-19
DOI
https://doi.org/10.3390/gels12111051
Primary Topic
Enhanced Oil Recovery Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Preparation and Evaluation of a Delayed Crosslinking Gel System for Deep Water Shutoff in Marine Unconsolidated Sandstone Reservoirs

Bo Liao, 黄军立, 杨延龙, Jintang Wang et al.
Gels
Enhanced Oil Recovery Techniques
article

Preparation and Evaluation of a Delayed Crosslinking Gel System for Deep Water Shutoff in Marine Unconsolidated Sandstone Reservoirs

Bo Liao, 黄军立, 杨延龙, Jintang Wang, Mashuai Che, Jinsheng Sun, Jian Sun, Chen Wang
article en

Abstract

Water channeling in offshore unconsolidated sandstone reservoirs motivates the development of injectable gels for water shutoff. A polymer prepared from acrylamide, N-vinylpyrrolidone, and cetyl methacrylate (designated ANC16) was combined with polyethyleneimine (PEI) and evaluated by FTIR, 1H NMR, dry-sample thermogravimetry, Sydansk bottle tests, and sand-pack flooding. FTIR and 1H NMR support the proposed functional groups and structural motifs of the precursor polymer. The formulation selected from the tested concentration series contained 0.5 wt% ANC16 and 0.25 wt% PEI. At 35,000 mg/L total salinity, the time to reach Sydansk grade D decreased from 64 to 22 h as temperature increased from 30 to 110 °C. Grade-H gels were observed at salinities of 0–30,000 mg/L at 90 °C. In the sand-pack experiment at 90 °C and 35,000 mg/L, the maximum precursor injection pressure was 0.185 MPa, and subsequent treatment reduced water-phase permeability by 97.85%. During flooding at 1 mL/min, injection pressure remained near 2.2 MPa from approximately four to 20 pore volumes. These results demonstrate delayed gel development, laboratory injectivity, and sustained flow restriction over the tested interval.

GelsVol. 12(11)
China National Offshore Oil Corporation (China) (CN), China University of Petroleum, East China (CN), China National Petroleum Corporation (China) (CN)
Enhanced Oil Recovery Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon