Comparative Study of Natural Compatibilisers in PBAT/TPS Biodegradable Films
Poly (butylene adipate-co-terephthalate) (PBAT) exhibited versatile properties for production of biodegradable flexible film, but its blend with thermoplastic starch (TPS) reduces its high cost while improves processability. However, the blend compatibilisation is required to improve the blend properties. A comparative study was carried out to investigate the compatibilising effect of citric acid (CA), stearic acid (SA) and lignin (LG) in PBAT/TPS blends (70:30), using 2.5% wt. of each in films produced by melt blending and compression moulding. The FESEM and FTIR analysis revealed that CA was the most effective at promoting TPS dispersion and interfacial adhesion within the PBAT matrix, but it had some hydrolytic effect that reduced the melt flow index (MFI) values of molten blend. LG also favoured the interfacial adhesion of both polymers, providing the films with its natural brown colour. In contrast, SA did not improve interfacial adhesion and exerted a lubricating effect which also reduced the MFI values. Reducing the CA ratio and intensifying the thermoprocessing conditions for the blends with LG or SA could improve the final properties of the films.
Authors
- Pedro A. V. Freitas (ORCID: https://orcid.org/0000-0003-0422-0345)
- Amparo Chiralt (ORCID: https://orcid.org/0000-0003-1134-8144)
- Chelo González‐Martínez (ORCID: https://orcid.org/0000-0001-9993-8303)
- Blanca Barranco Mozos
Institutions
- Universitat Politècnica de València (ES)
Publication Details
- Journal
- Polymers
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/polym18222909
- Primary Topic
- biodegradable polymer synthesis and properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00