Study on a Solid Retarded Acid System for Acid Fracturing in High-Temperature Carbonate Reservoirs

Acid fracturing is a key stimulation technology for high-temperature carbonate geothermal and hydrocarbon reservoirs. However, conventional hydrochloric acid systems suffer from rapid acid–rock reactions at high temperatures, strong corrosivity, large storage demands, and safety and environmental concerns. Here, a novel solid acid, MA-A (Modified Anhydride-based Acid), was prepared by modifying an organic acid anhydride, followed by metathesis and high-temperature calcination. FT-IR confirmed the introduction of carboxyl groups, providing the basis for sustained acid release. The acid-generation performance, dissolution behavior, acid–rock reaction kinetics, corrosion resistance, etched-fracture morphology, and fracture conductivity of MA-A were systematically evaluated. The results showed that 17% MA-A at 120 °C generated an effective acid concentration equivalent to 11.4% HCl and sustained H+ release for approximately 140 min, confirming its excellent retarded acid-generation capability. For Maokou Formation carbonate rock, 25% MA-A achieved an average dissolution rate of 90.2%, while its acid–rock reaction rate was lower than that of conventional hydrochloric acid systems. Moreover, MA-A maintained superior fracture conductivity retention under high closure stress. In addition, under the experimental conditions, MA-A caused much less corrosion of N80 steel than conventional acids, and with corrosion inhibitor GT, the system met high-temperature application requirements. Although the initial conductivity of MA-A-etched fractures was lower than that of gelled acid, it declined more slowly under high closure pressure, indicating better flow-channel retention. Overall, MA-A exhibited favorable acid-release, corrosion-control, and fracture-conductivity characteristics under the investigated laboratory conditions.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-19
DOI
https://doi.org/10.1021/acsomega.6c07495
Primary Topic
Hydraulic Fracturing and Reservoir Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Study on a Solid Retarded Acid System for Acid Fracturing in High-Temperature Carbonate Reservoirs

Jianwen Shen, 王用军, Junqing Dai, Pingli Liu et al.
ACS Omega
Hydraulic Fracturing and Reservoir Analysis
article

Study on a Solid Retarded Acid System for Acid Fracturing in High-Temperature Carbonate Reservoirs

Jianwen Shen, 王用军, Junqing Dai, Pingli Liu, Hong Zhu, Yutong Yao
article en

Abstract

Acid fracturing is a key stimulation technology for high-temperature carbonate geothermal and hydrocarbon reservoirs. However, conventional hydrochloric acid systems suffer from rapid acid–rock reactions at high temperatures, strong corrosivity, large storage demands, and safety and environmental concerns. Here, a novel solid acid, MA-A (Modified Anhydride-based Acid), was prepared by modifying an organic acid anhydride, followed by metathesis and high-temperature calcination. FT-IR confirmed the introduction of carboxyl groups, providing the basis for sustained acid release. The acid-generation performance, dissolution behavior, acid–rock reaction kinetics, corrosion resistance, etched-fracture morphology, and fracture conductivity of MA-A were systematically evaluated. The results showed that 17% MA-A at 120 °C generated an effective acid concentration equivalent to 11.4% HCl and sustained H+ release for approximately 140 min, confirming its excellent retarded acid-generation capability. For Maokou Formation carbonate rock, 25% MA-A achieved an average dissolution rate of 90.2%, while its acid–rock reaction rate was lower than that of conventional hydrochloric acid systems. Moreover, MA-A maintained superior fracture conductivity retention under high closure stress. In addition, under the experimental conditions, MA-A caused much less corrosion of N80 steel than conventional acids, and with corrosion inhibitor GT, the system met high-temperature application requirements. Although the initial conductivity of MA-A-etched fractures was lower than that of gelled acid, it declined more slowly under high closure pressure, indicating better flow-channel retention. Overall, MA-A exhibited favorable acid-release, corrosion-control, and fracture-conductivity characteristics under the investigated laboratory conditions.

ACS Omega
Sinopec (China) (CN), Southwest Petroleum University (CN)
Hydraulic Fracturing and Reservoir Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon