Geometric Optimization of Sprag Overrunning Clutches for Improved Torque Capacity Based on Nonlinear Transient Analysis

Sprag overrunning clutches provide one-way torque transmission in powertrains, but their performance during engagement is governed by nonlinear contact and frictional interactions. The strong coupling between geometric parameters, contact forces, and failure mechanisms makes it difficult to identify optimal designs through analytical approaches or conventional parametric studies. This study presents a failure-aware geometric-optimization framework that integrates nonlinear transient dynamic analysis to improve torque transmission performance while accounting for the competing design requirements. A displacement-based nonlinear dynamic model is employed to evaluate contact stress, slippage, and sprag rollover during transient loading. By combining this model with a genetic algorithm, the framework searches for a desired combination of five geometric parameters. A stress-weighted objective function favors higher failure-onset torque and lower contact stress, while geometric feasibility constraints are imposed. For fixed inner and outer race radii, the best design increases the slippage-onset torque by 42.8 %, while reducing the corresponding maximum contact stress from 3.23 to 2.83 GPa, below the prescribed allowable limit. Under identical loading conditions, the optimized geometry also reduces contact stress and sprag rotation, but exhibits a lower frictional safety margin. Repeating the optimization with a reduced friction coefficient yields a different geometry with a higher frictional safety margin under nominal conditions, although at the expense of increased stress and rotation. These results demonstrate the potential of integrating transient dynamics with geometric optimization to identify improved clutch designs while revealing trade-offs between torque transmission and frictional robustness.

Authors

Institutions

Publication Details

Published
2026-11-19
DOI
https://doi.org/10.5194/ms-2026-199
Primary Topic
Gear and Bearing Dynamics Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Geometric Optimization of Sprag Overrunning Clutches for Improved Torque Capacity Based on Nonlinear Transient Analysis

Stefano Zucca, Christian Maria Firrone, Fahimeh Mashayekhi
Gear and Bearing Dynamics Analysis
preprint

Geometric Optimization of Sprag Overrunning Clutches for Improved Torque Capacity Based on Nonlinear Transient Analysis

Stefano Zucca, Christian Maria Firrone, Fahimeh Mashayekhi
preprint en

Abstract

Sprag overrunning clutches provide one-way torque transmission in powertrains, but their performance during engagement is governed by nonlinear contact and frictional interactions. The strong coupling between geometric parameters, contact forces, and failure mechanisms makes it difficult to identify optimal designs through analytical approaches or conventional parametric studies. This study presents a failure-aware geometric-optimization framework that integrates nonlinear transient dynamic analysis to improve torque transmission performance while accounting for the competing design requirements. A displacement-based nonlinear dynamic model is employed to evaluate contact stress, slippage, and sprag rollover during transient loading. By combining this model with a genetic algorithm, the framework searches for a desired combination of five geometric parameters. A stress-weighted objective function favors higher failure-onset torque and lower contact stress, while geometric feasibility constraints are imposed. For fixed inner and outer race radii, the best design increases the slippage-onset torque by 42.8 %, while reducing the corresponding maximum contact stress from 3.23 to 2.83 GPa, below the prescribed allowable limit. Under identical loading conditions, the optimized geometry also reduces contact stress and sprag rotation, but exhibits a lower frictional safety margin. Repeating the optimization with a reduced friction coefficient yields a different geometry with a higher frictional safety margin under nominal conditions, although at the expense of increased stress and rotation. These results demonstrate the potential of integrating transient dynamics with geometric optimization to identify improved clutch designs while revealing trade-offs between torque transmission and frictional robustness.

Politecnico di Torino (IT)
Gear and Bearing Dynamics Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon