Multiphase architecture enabling high elastic modulus and strength in ultralight Mg-Li alloy
The low strength and elastic modulus of Mg-Li alloys severely restrict their structural applications. In this work, the Mg-28.5Li-10.3Al-0.8Zn-1.5Y (at.%) alloy with a multiphase architecture is designed, containing high-modulus Al 2 Y and Li(Al, Zn) phases and semi-coherent Mg 3 (Al, Zn) nanoprecipitates. The solution-treated extruded alloy exhibits a high elastic modulus of 56 GPa, a compressive yield strength of 430 MPa, and a tensile yield strength of 330 MPa. The Mg 3 (Al, Zn) phase enhances the strength through coherency, modulus, and ordering strengthening, while the abundant high-modulus phases markedly increase the stiffness. In-situ synchrotron measurements reveal that the constituent phases respond to the load through elastic cooperative deformation and progressive load partitioning.
Authors
- Fangzhou Qi (ORCID: https://orcid.org/0000-0002-9363-9529)
- Wencai Liu
- Jiaxin Yu (ORCID: https://orcid.org/0009-0003-0089-1878)
- Jiawei Sun
- Yuchuan Huang
- Youjie Guo
- Yangyang Xu
- Peng Sun
- Rui Wang
- Jinqiang Han
Institutions
- Shanghai Jiao Tong University (CN)
- State Key Laboratory of Metal Matrix Composites (CN)
Publication Details
- Journal
- Journal of Magnesium and Alloys
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1016/j.jma.2026.102407
- Primary Topic
- Magnesium Alloys: Properties and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00