Surface integrity and strengthening mechanisms of Ti-6Al-4 V fabricated by laser directed energy deposition under dual-stage abrasive waterjet peening

Abrasive waterjet peening (AWJP) is a promising surface treatment technique widely utilized to enhance the surface integrity of metallic materials. An effective peening strategy should balance surface quality and deep subsurface hardening while avoiding abrasive embedment, microcracking, and phase instability. This balance is particularly challenging for laser directed energy deposition (L-DED) Ti-6Al-4 V (Ti64), because its as-deposited acicular microstructure presents a notable barrier to the effectiveness of conventional single-stage peening. To address these issues, a dual-stage AWJP process was proposed to enhance the surface integrity and strengthening performance of L-DED Ti64. The strengthening mechanisms in the second stage were evaluated across three distinct intensities. In terms of subsurface mechanical response, the dual-stage process at a proper intensity achieved a maximum hardness of 475 HV at 50 μm (6.5% enhancement over the conventional single stage) and maintained the highest hardness throughout the near-surface region, remaining at 425 HV at a depth of 150 μm. EBSD analysis further showed that the deformed layer increased from approximately 13 μm after single-stage steel-shot peening to approximately 45 μm after the optimized dual-stage treatment. However, under high-intensity impacts, EBSD phase indexing indicated a thin retained β-phase signal at the topmost surface, suggesting possible local phase instability induced by severe plastic deformation. Ultimately, these findings validate the dual-stage AWJP approach as an effective method to overcome the limitations of single-stage treatment, providing a strategic balance of surface quality, deep-layer hardening, and phase stability for high-performance aerospace repairs.

Authors

Institutions

Publication Details

Journal
Journal of Manufacturing Processes
Published
2026-11-19
DOI
https://doi.org/10.1016/j.jmapro.2026.11.050
Primary Topic
Surface Treatment and Residual Stress
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Surface integrity and strengthening mechanisms of Ti-6Al-4 V fabricated by laser directed energy deposition under dual-stage abrasive waterjet peening

Shusong Zan, Andy Norton, Zhirong Liao, Andres Gameros et al.
Journal of Manufacturing Processes
Surface Treatment and Residual Stress
article

Surface integrity and strengthening mechanisms of Ti-6Al-4 V fabricated by laser directed energy deposition under dual-stage abrasive waterjet peening

Shusong Zan, Andy Norton, Zhirong Liao, Andres Gameros, Fengrui Zhang
article en

Abstract

Abrasive waterjet peening (AWJP) is a promising surface treatment technique widely utilized to enhance the surface integrity of metallic materials. An effective peening strategy should balance surface quality and deep subsurface hardening while avoiding abrasive embedment, microcracking, and phase instability. This balance is particularly challenging for laser directed energy deposition (L-DED) Ti-6Al-4 V (Ti64), because its as-deposited acicular microstructure presents a notable barrier to the effectiveness of conventional single-stage peening. To address these issues, a dual-stage AWJP process was proposed to enhance the surface integrity and strengthening performance of L-DED Ti64. The strengthening mechanisms in the second stage were evaluated across three distinct intensities. In terms of subsurface mechanical response, the dual-stage process at a proper intensity achieved a maximum hardness of 475 HV at 50 μm (6.5% enhancement over the conventional single stage) and maintained the highest hardness throughout the near-surface region, remaining at 425 HV at a depth of 150 μm. EBSD analysis further showed that the deformed layer increased from approximately 13 μm after single-stage steel-shot peening to approximately 45 μm after the optimized dual-stage treatment. However, under high-intensity impacts, EBSD phase indexing indicated a thin retained β-phase signal at the topmost surface, suggesting possible local phase instability induced by severe plastic deformation. Ultimately, these findings validate the dual-stage AWJP approach as an effective method to overcome the limitations of single-stage treatment, providing a strategic balance of surface quality, deep-layer hardening, and phase stability for high-performance aerospace repairs.

Journal of Manufacturing ProcessesVol. 180
University of Nottingham (GB), Rolls-Royce (United Kingdom) (GB)
Surface Treatment and Residual Stress
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon