Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels
The Charpy impact energy of ferritic steels varies sigmoidally with temperature, and the resulting ductile-to-brittle transition (DBT) curve is commonly described by a hyperbolic-tangent (tanh) equation. This study compares the following two ways of learning this curve from heterogeneous literature data: direct regression of the impact energy, and an equation-constrained approach in which the learner predicts the four tanh parameters and is trained end-to-end through the equation. A database of 604 Charpy V-notch measurements from 40 publications (58 steels) was compiled and supplemented with physics-derived descriptors, and six tree and neural-network models were tuned under the same protocol. Under random cross-validation the five models that use all measurements reach R2 = 0.71–0.89, but when whole steels are held out, R2 falls to 0.12–0.32. The equation-constrained models return smooth sigmoids with interpretable parameters at a similar accuracy under the grouped schemes, but the transition temperatures predicted for unseen steels remain uncertain (mean absolute errors of 35–41 °C). On four in-house quenched-and-tempered cast steels tested between −40 and 25 °C, the equation-constrained network had the lowest mean absolute error (28 J; other models 44–55 J), a ranking that depends on network settings and on the values assumed for unanalysed elements. Adaptation with three cast steels reduced the error on the fourth to 21–29 J for all models, no lower than a curve fitted to the cast data alone. SHAP attributed the transition temperature and the upper-shelf energy mainly to carbon and tempering.
Authors
- Namhyuk Seo (ORCID: https://orcid.org/0000-0002-1015-1430)
- Seok-Jae Lee (ORCID: https://orcid.org/0000-0003-2463-8706)
- Minsu Kim (ORCID: https://orcid.org/0000-0003-1548-7635)
- Ji-Woo Park
- Junghoon Yang
Institutions
- Jeonbuk National University (KR)
- Korea Institute of Industrial Technology (KR)
Publication Details
- Journal
- Metals
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/met16111269
- Primary Topic
- Machine Learning in Materials Science
- Type
- article
- Field-Weighted Citation Impact
- 0.00