A study of the pressing and sintering process of the R6M5K5 steel charge obtained by electroerosive dispersion

The purpose of the work was to produce blanks from a powder mixture of high‑speed steel grade R6M5K5, formed using electroerosive dispersion, by applying specified pressing and subsequent sintering regimes. As part of the study, the influence of the applied pressure during forming on the density of the resulting blanks was assessed, and the patterns of change in the linear dimensions and shrinkage of the material during the sintering process were established. Methods. The starting material for the experimental studies was a powder charge of high-speed steel of the R6M5K5 grade, obtained by the method of electrical discharge dispersion. The powder material under study was formed using a press mold specially manufactured for the experiment. After completing the pressing operation, the formed blanks were subjected to heat treatment by the sintering method. For this operation, the blanks were placed in a graphite crucible, after which the crucible was placed in the working chamber of the EKPZ-10 furnace for heating casting molds. The heat treatment was carried out by sequentially holding the material at the specified temperature regimes. The holding time at a temperature of 450°C was 60 minutes, at 900°C ‒ 120 minutes, and when the temperature reached 1115°C, the holding time was 150 minutes. Results . Based on the results of the experiments, it was established that increasing the pressing force from 5 to 10 tons leads to an increase in the density of the formed workpiece by approximately 1%. The observed change in density is due to more intensive compaction of the powdered material as the external mechanical stress increases. Conclusion . The results of the work carried out can be used as a basis for subsequent research into the features of the structure formation of high‑speed steel P6M5K5, obtained from powder using the electroerosive dispersion method. The obtained dependencies can also be used when selecting and optimizing the technological parameters of pressing and sintering the powder charge for the manufacture of workpieces with specified operational properties.

Authors

Publication Details

Journal
Proceedings of the Southwest State University Series Engineering and Technologies
Published
2026-11-18
DOI
https://doi.org/10.21869/2223-1528-2026-16-3-8-20
Primary Topic
Powder Metallurgy Techniques and Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A study of the pressing and sintering process of the R6M5K5 steel charge obtained by electroerosive dispersion

Ekaterina Vladimirovna Ageeva, M. U. Stepanov, V. V. Mishchenko
Proceedings of the Southwest State University Series Engineering and Technologies
Powder Metallurgy Techniques and Materials
article

A study of the pressing and sintering process of the R6M5K5 steel charge obtained by electroerosive dispersion

Ekaterina Vladimirovna Ageeva, M. U. Stepanov, V. V. Mishchenko
article en

Abstract

The purpose of the work was to produce blanks from a powder mixture of high‑speed steel grade R6M5K5, formed using electroerosive dispersion, by applying specified pressing and subsequent sintering regimes. As part of the study, the influence of the applied pressure during forming on the density of the resulting blanks was assessed, and the patterns of change in the linear dimensions and shrinkage of the material during the sintering process were established. Methods. The starting material for the experimental studies was a powder charge of high-speed steel of the R6M5K5 grade, obtained by the method of electrical discharge dispersion. The powder material under study was formed using a press mold specially manufactured for the experiment. After completing the pressing operation, the formed blanks were subjected to heat treatment by the sintering method. For this operation, the blanks were placed in a graphite crucible, after which the crucible was placed in the working chamber of the EKPZ-10 furnace for heating casting molds. The heat treatment was carried out by sequentially holding the material at the specified temperature regimes. The holding time at a temperature of 450°C was 60 minutes, at 900°C ‒ 120 minutes, and when the temperature reached 1115°C, the holding time was 150 minutes. Results . Based on the results of the experiments, it was established that increasing the pressing force from 5 to 10 tons leads to an increase in the density of the formed workpiece by approximately 1%. The observed change in density is due to more intensive compaction of the powdered material as the external mechanical stress increases. Conclusion . The results of the work carried out can be used as a basis for subsequent research into the features of the structure formation of high‑speed steel P6M5K5, obtained from powder using the electroerosive dispersion method. The obtained dependencies can also be used when selecting and optimizing the technological parameters of pressing and sintering the powder charge for the manufacture of workpieces with specified operational properties.

Proceedings of the Southwest State University Series Engineering and TechnologiesVol. 16(3)
Powder Metallurgy Techniques and Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon