DOE-based analysis of mechanical performance in FDM-printed ABS cellular structures: Effects of architecture, layer thickness, and build orientation
Small-scale, FDM-printed ABS cellular structures offer a promising route for lightweight, mechanically robust components with tailored energy absorption. In this study, the interplay of cellular architecture, layer thickness, and build orientation was systematically investigated using a full-factorial ( 3 3 ) DOE comprising 27 experimental runs. Flat (P), honeycomb (H), and re-entrant (R) cells were fabricated, and their tensile responses, including maximum force ( F max ) ultimate tensile strength ( σ U T S ), failure displacement ( x F a i l u r e ) , and mass ( M ) , were measured. The re-entrant architecture exhibited the highest tensile performance within the investigated design space, although its response depended on build orientation and layer thickness. Layer thickness significantly influenced F max and mass, whereas architecture-orientation interactions dominated σ U T S , x F a i l u r e , and mass ANOVA and regression analyses revealed strong response-dependent interactions, with the architecture-orientation interaction contributing 72.15, 58.91, and 71.14% to σ U T S , x F a i l u r e , and mass, respectively, while maximum force was primarily governed by the quadratic architecture effect (33.42%) and layer thickness (31.74%). These results provide a quantitative process-structure-property framework for optimizing FDM parameters and rationally designing lightweight, mechanically efficient cellular structures for engineering applications.
Authors
- Yazid Ait Ferhat (ORCID: https://orcid.org/0000-0002-9586-296X)
- Kamel Zouggar (ORCID: https://orcid.org/0000-0001-8495-3754)
- Kouider Encadreur Madani (ORCID: https://orcid.org/0000-0003-3277-1187)
- Toufik Benmansour (ORCID: https://orcid.org/0009-0007-4846-7127)
- Mohammed Walid Harmel (ORCID: https://orcid.org/0009-0006-8771-4154)
- Tarek Bouakba (ORCID: https://orcid.org/0009-0000-1354-0354)
- Houssam-Eddine Fiala
Institutions
- University Frères Mentouri Constantine 1 (DZ)
- Université Djilali de Sidi Bel Abbès (DZ)
- Centre de Recherche en Technologie des Semi-conducteurs pour l’Energétique (DZ)
- University of Batna 2 (DZ)
- Center of Research in Mechanics (DZ)
Publication Details
- Journal
- Journal of Cellular Plastics
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1177/0021955x261510193
- Primary Topic
- Cellular and Composite Structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00