Influence of Comonomer Side-Chain Length on the Drag-Reduction Performance of Ultrahigh-Molecular-Weight Poly(α-Olefin)s in Diesel
Poly(α-olefin) (PAO) drag reducers are widely used to lower the pumping energy of crude-oil and refined-product pipelines. To examine how comonomer side-chain length affects drag reduction at ultrahigh molecular weights, five PAOs were synthesized with a TiCl4/AlEt2Cl Ziegler–Natta catalyst: three copolymers (S1, C6/C12; S2, C6/C8; S3, C8/C10; polystyrene-equivalent Mw = 4.42, 4.32 and 3.81 × 106 g·mol−1) and two homopolymers (S4, C6; S5, C8; Mw = 7.8 and 3.3 × 105 g·mol−1). Drag reduction was measured at 20 ppm in 0# diesel on a flow loop, and the polymers were characterized by GPC, DSC, FTIR and solid-state NMR. All samples were amorphous (Tg = −56.9 to −60.8 °C). The copolymers outperformed the lower-molecular-weight homopolymers, and S2 gave the highest drag reduction (57.0 ± 0.3%), higher than S1 (51.8 ± 1.3%, p = 0.003) despite a similar Mw. For all five samples, drag reduction followed the order of the backbone degree of polymerization estimated from Mw and the feed composition. At a comparable Mw, comonomers with shorter side chains are therefore preferable, because more of the molar mass resides in the backbone.
Authors
- Wenpeng Min
- Wu Zhang (ORCID: https://orcid.org/0000-0001-9825-8613)
- Ling Wang (ORCID: https://orcid.org/0000-0001-5897-8122)
- Peng Xiao (ORCID: https://orcid.org/0009-0008-0318-6249)
- Zhiming Yang (ORCID: https://orcid.org/0000-0001-8196-7528)
- Zexin Sun
- Zhihan Tang
- Jianzhe Yang
- Jiafeng Zhao
- Wang Lu
- Jiongchen Zhu
Publication Details
- Journal
- Polymers
- Published
- 2026-11-19
- DOI
- https://doi.org/10.3390/polym18222911
- Primary Topic
- Rheology and Fluid Dynamics Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00