Rheological characteristics of fine-grained tailings slurry paste
During the pumping procedure of fine-grained tailings slurry, its rheological properties are crucial for flow regime analysis and pipeline transmission pressure loss calculation in pipeline transportation. This paper employs a variable shear rate loading method to experimentally investigate the rheological characteristics of fine-grained tailings slurry at different concentrations. The results indicate that the plastic viscosity of fine-grained tailings slurry decreases with increasing shear rate following a negative exponential function, while the yield stress increases with increasing shear rate following a positive exponential function; both tend to stabilize after acting for a certain period. The minimum plastic viscosity μ min occurs when the internal structure of the slurry reaches dynamic equilibrium; the maximum plastic viscosity μ max is observed when the internal structure is undisturbed by external load, corresponding to the yield stress τ 0max associated with the dynamic equilibrium of structural breakdown and reformation. All three parameters gradually increase with the mass concentration of the slurry. An improved exponent Bingham model applicable to fine-grained tailings slurry under variable shear rate flow conditions was established and verified. This model can serve as the rheological equation for fine-grained tailings slurry under variable shear rate loading to describe its rheological behavior and provide a reference for slurry pipeline transportation design.
Authors
- Ze Liao (ORCID: https://orcid.org/0000-0003-0927-4166)
- Ze Zhou (ORCID: https://orcid.org/0000-0002-3073-8204)
- Li Peng
- Wang Xianqing
- Tang Yujie
- Wen Ruicheng
- Ren Yanchuan
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1038/s41598-026-80493-2
- Primary Topic
- Tailings Management and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00