Wax Precipitation and Phase-Behavior Evolution of High-Pour-Point Crude Oil Under Different Temperature and Pressure Conditions: An Experimental Study

High-pour-point crude oils undergo substantial rheological and phase-state changes during production as temperature decreases and pressure declines. To investigate the effects of temperature and pressure on wax precipitation and phase evolution, constant-pressure cooling experiments and constant-temperature pressure-variation PVT tests were conducted on high-pour-point crude oil under reservoir-relevant conditions. Wax appearance temperature (WAT) was estimated from viscosity–temperature curves using a two-segment linear-fitting method at 10, 20, 30, and 40 MPa, while gas–oil ratio, oil formation volume factor, density, relative volume, and saturation pressure were characterized over 50–101 °C. The viscosity–temperature curves exhibited a distinct two-stage response, with viscosity increasing gradually at higher temperatures and more rapidly during cooling as wax crystallization became significant. The calculated WAT values were 67.47, 69.82, 68.44, and 66.11 °C at 10, 20, 30, and 40 MPa, respectively, exhibiting a non-monotonic pressure dependence with a maximum variation of 3.71 °C. The PVT properties also exhibited pronounced responses to temperature and pressure. The oil formation volume factor decreased with increasing pressure and increased with temperature, whereas density showed the opposite trend. Relative volume varied gradually above the saturation pressure but increased sharply below it, indicating the transition from an undersaturated liquid state toward gas–liquid coexistence. The saturation pressure decreased approximately linearly from 8.98 MPa at 50 °C to 7.22 MPa at 101 °C. Overall, the results indicate that cooling strongly influences wax precipitation and rheological behavior, while pressure affects both WAT and gas–liquid phase equilibrium. These findings provide insights into the distinct responses of wax precipitation and PVT properties to temperature and pressure, supporting thermal management, pressure-drawdown optimization, and flow-assurance design in high-pour-point crude-oil production.

Authors

Institutions

Publication Details

Journal
Processes
Published
2026-11-19
DOI
https://doi.org/10.3390/pr14223724
Primary Topic
Petroleum Processing and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wax Precipitation and Phase-Behavior Evolution of High-Pour-Point Crude Oil Under Different Temperature and Pressure Conditions: An Experimental Study

Zongyao Qi, Ce Shang, Fajun Zhao, Nian Sun et al.
Processes
Petroleum Processing and Analysis
article

Wax Precipitation and Phase-Behavior Evolution of High-Pour-Point Crude Oil Under Different Temperature and Pressure Conditions: An Experimental Study

Zongyao Qi, Ce Shang, Fajun Zhao, Nian Sun, Peng Liu, Qun Li, Yuning Gong, Huizhuo He
article en

Abstract

High-pour-point crude oils undergo substantial rheological and phase-state changes during production as temperature decreases and pressure declines. To investigate the effects of temperature and pressure on wax precipitation and phase evolution, constant-pressure cooling experiments and constant-temperature pressure-variation PVT tests were conducted on high-pour-point crude oil under reservoir-relevant conditions. Wax appearance temperature (WAT) was estimated from viscosity–temperature curves using a two-segment linear-fitting method at 10, 20, 30, and 40 MPa, while gas–oil ratio, oil formation volume factor, density, relative volume, and saturation pressure were characterized over 50–101 °C. The viscosity–temperature curves exhibited a distinct two-stage response, with viscosity increasing gradually at higher temperatures and more rapidly during cooling as wax crystallization became significant. The calculated WAT values were 67.47, 69.82, 68.44, and 66.11 °C at 10, 20, 30, and 40 MPa, respectively, exhibiting a non-monotonic pressure dependence with a maximum variation of 3.71 °C. The PVT properties also exhibited pronounced responses to temperature and pressure. The oil formation volume factor decreased with increasing pressure and increased with temperature, whereas density showed the opposite trend. Relative volume varied gradually above the saturation pressure but increased sharply below it, indicating the transition from an undersaturated liquid state toward gas–liquid coexistence. The saturation pressure decreased approximately linearly from 8.98 MPa at 50 °C to 7.22 MPa at 101 °C. Overall, the results indicate that cooling strongly influences wax precipitation and rheological behavior, while pressure affects both WAT and gas–liquid phase equilibrium. These findings provide insights into the distinct responses of wax precipitation and PVT properties to temperature and pressure, supporting thermal management, pressure-drawdown optimization, and flow-assurance design in high-pour-point crude-oil production.

ProcessesVol. 14(22)
Research Institute of Petroleum Exploration and Development (CN), State Key Laboratory of Enhanced Oil Recovery (CN), Northeast Petroleum University (CN)
Petroleum Processing and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon