Photovoltaic Condition Assessment from I–V Curve Shape Alone: A Generic Normalized Reference Approach

Photovoltaic (PV) diagnostic systems based on current–voltage (I–V) curve tracing commonly rely on irradiance and temperature measurements and module-specific datasheet parameters. This paper presents a model-based condition-assessment approach that uses a fixed generic normalized reference and only voltage and current measurements. Each measured I–V curve is normalized to its own open-circuit voltage and short-circuit current and compared with the reference using a pointwise absolute current residual. From this residual, two quantitative indicators are defined: the percentage residual area Pr and the maximum residual rmax. The approach is experimentally evaluated using 38 I–V sweeps, 19 under uniform irradiance and 19 under partial shading, showing that curve-shape deformations produce larger indicator values. A sensitivity analysis further shows that the separation between the two experimental conditions persists across the evaluated reference-parameter range, although the indicator magnitudes vary. The proposed method therefore provides a compact quantitative assessment of normalized I–V curve-shape deviations without requiring environmental measurements or module-specific electrical parameters during the assessment stage.

Authors

Institutions

Publication Details

Journal
Energies
Published
2026-11-19
DOI
https://doi.org/10.3390/en19225597
Primary Topic
Photovoltaic System Optimization Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Photovoltaic Condition Assessment from I–V Curve Shape Alone: A Generic Normalized Reference Approach

José Ángel Pecina-Sánchez, Héctor A. Álvarez-Macías, Ernesto Bárcenas, J.-E. Hernández-Díez et al.
Energies
Photovoltaic System Optimization Techniques
article

Photovoltaic Condition Assessment from I–V Curve Shape Alone: A Generic Normalized Reference Approach

José Ángel Pecina-Sánchez, Héctor A. Álvarez-Macías, Ernesto Bárcenas, J.-E. Hernández-Díez, D.R. Espinoza-Trejo, Azahel de Jesús Rangel-López, Ambrocio Loredo-Flores
article en

Abstract

Photovoltaic (PV) diagnostic systems based on current–voltage (I–V) curve tracing commonly rely on irradiance and temperature measurements and module-specific datasheet parameters. This paper presents a model-based condition-assessment approach that uses a fixed generic normalized reference and only voltage and current measurements. Each measured I–V curve is normalized to its own open-circuit voltage and short-circuit current and compared with the reference using a pointwise absolute current residual. From this residual, two quantitative indicators are defined: the percentage residual area Pr and the maximum residual rmax. The approach is experimentally evaluated using 38 I–V sweeps, 19 under uniform irradiance and 19 under partial shading, showing that curve-shape deformations produce larger indicator values. A sensitivity analysis further shows that the separation between the two experimental conditions persists across the evaluated reference-parameter range, although the indicator magnitudes vary. The proposed method therefore provides a compact quantitative assessment of normalized I–V curve-shape deviations without requiring environmental measurements or module-specific electrical parameters during the assessment stage.

EnergiesVol. 19(22)
Autonomous University of San Luis Potosí (MX)
Photovoltaic System Optimization Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon